[1] Ming Cheng,Minghao Tong, “Development status and trend of electric vehicles in China,” Chinese Journal of Electrical Engineering, vol.3, no.2, pp.1-13, 2017. [2] Haibo Chai, Zhiguo Yan,Mingwei Kuang, “The development status of driving motors for electric vehicles,” Small & Special Electrical Machines, vol.41, no.4, pp.52-57, 2013. [3] Weh H,H. May, “Achievable force densities for permanent magnet excited machines in new configurations,” Proc. Int. Conf. on Electrical Machines, Proceedings of ICEM, Munich, Germany, pp.1107-1111, 1986. [4] H. Weh, H. Hoffmann,J. Landrath, “New permanent magnet excited synchronous machine with high efficiency at low speed,” inProc. ICEM, pp. 35-40, 1988. [5] Guolong Yang, Dansong Cheng,He Zhang, “Bidirectional cross-linking transverse flux permanent magnet synchronous motor,” IEEE Transactions on Magnetics, vol.49, no.3, pp.1242-1248, 2013. [6] Youguang Guo, Jianguo Zhu, Haiyan Lu, Yongjian Li,Jianxun Jin, “Core loss computation in a permanent magnet transverse flux motor with rotating fluxes,” IEEE Transactions on Magnetics, vol.50, no.11, pp.1111-1114, 2014. [7] Junya Tanaka,Kazuto Sakai, “Enhanced transverse-flux motor with torus coils,” The2014 International Power Electronics Conference, Hiroshima, Japan, pp.240-245, 2014. [8] Baoquan Kou, Jun Luo,Xiaobao Yang, “Modeling and analysis of a novel transverse-flux flux-reversal linear motor for long-stroke application,” IEEE Transactions on Industrial Electronics, vol.63, no.10, pp.6238-6248, 2016. [9] Baoquan Kou, Xiaobao Yang, Jun Luo,Yiheng Zhou, “Modeling and analysis of a transverse-flux flux-reversal motor,” IEEE Transactions on Energy Conversion, vol.31, no.3, pp.1121-1131, 2016. [10] Qian Wang, Bo Zhao, Hui Zhao, Yong Li,Jibin Zou, “Optimal design of tubular transverse flux motors with low cogging forces for direct drive applications,” IEEE Transactions on Applied Superconductivity, vol.26, no.7, pp.1051-1054, 2016. [11] Youguang Guo, Gang Lei, Jianguo Zhu,Dung H.Pham, “Performance analysis of a permanet magnet SMC transverse flux motor with multiobjective optimization strategy,”22nd Australasian Universities Power Engineering Conference, Sydney, pp.1-6, 2012. [12] Jung Seob Shin, Takafumi Koseki,Houng-Joong Kim, “Proposal of double-sided transverse flux linear synchronous motor and a simplified design for maximum thrust in nonsaturation region,” IEEE Transactions on Magnetics, vol.49, no.7, pp.4104-4108, 2013. [13] Xiaqing Pei, Zhiyu Sheng,Yuanjun Zhou, “Research on the mechanical characteristic of a novel building-block transverse flux permanent-magnetic motor(B-TFPM),” IEEE/ CSAA International Conference on Aircraft Utility Systems (AUS), Beijing, China, pp.658-663, 2016. [14] Jung-Seob Shin, Ryuji Watanabe, Takafumi Koseki,Houng-Joong Kim, “Transverse-flux-type cylindrical linear synchronous motor using generic armature cores for rotary machinery,” IEEE Transactions on Industrial Electronics, vol.61, no.8, pp.4346-4355, 2014. [15] Qinfen Lu, Yanxin Li, Yunyue Ye, Youtong Fang, “A novel transverse-flux switched-flux PM linear motor,” 2013 International Conference on Electrical Machines and Systems, Busan, Korea, pp.1907-1912, Oct. 26-29, 2013. [16] Seon-Hwan Hwang, Deok-Je Bang,Ji-Won Kim, “Air gap control of multi-phase transverse flux permanent magnet linear synchronous motor by using independent vector control,” The 2014 International Power Electronics Conference, Hiroshima, pp.2427-2432, 18-21 May 2014. [17] Yasuhito Ueda, Hiroshi Takahashi, Toshikatsu Akiba,Mitsunobu Yoshida, “Fundamental design of a consequentpole transverse-flux motor for direct-drive systems,” IEEE Transactions on Magnetics, vol.49, no.7, pp.4096-4099, 2013. [18] Hongyang Yao, Hongmei Li,Kai Wang, “Design and optimization of a concentrated flux transverse flux permanent motor,” IEEE 8th International Power Electronics and Motion Control Conference, Hefei, China, pp.3018-3021, 2016. [19] Rashed Meer, H. M. Hasanien, and A. I. Alolah, “Dynamic simulation of single phase transverse flux linear motor,” International Renewable and Sustainable Energy Conference (IRSEC), Ouarzazate, Morocco, pp. 493-498, 2014. [20] Ahmad Darabi, Ali Sarreshtehdari,Hamed Tahanian, “Design of the forced water cooling system for a claw pole transverse flux permanent magnet synchronous motor, ” 21st Iranian Conference on Electrical Engineering, Mashhad, Iran, pp:897-901, 2013. [21] Dongshan Fu, Yanliang Xu,Jinlin Gong, “Presentation of E-core transverse-flux permanent magnet linear motor and its no-load magnetic field analysis based on Schwarz-Christoffel transformation,”IEEE Conference on Electromagnetic Field Computation, pp.1-1, 2016. [22] Zhou Jia, Heyun Lin,Hui Yang, “Transverse flux permanent magnet motor with double-C stator hoops and flux-concentrated rotor for in-wheel drive electric vehicle,” IEEE Energy Conversion Congress and Exposition (ECCE), Pittsburgh, PA, USA, pp.4084-4088, 2014. [23] Yaxin Li, Hui Li,Ziyan Liu, “Design and implement of novel transverse flux switched magnetic energy motor combined with control system,” IEEE International Conference on Mechatronics and Automation, Takamatsu, Japan, pp. 1675-1680, 2013. [24] R. Watanabe, J. S. Shin, T. Koseki,H. J. Kim, “Optimal design for high output power of transverse-flux-type cylindrical linear synchronous generator,” IEEE Transactions on Magnetics, vol.50, no.11, Art. ID 8202704, 2014. [25] Ming Cheng, Wei Hua, Jianzhong Zhang,Wenxiang Zhao, “Overview of stator-permanent magnet brushless machines,” IEEE Transactions on Industrial Electronics, vol.58, no.11, pp.5087-5101, 2011. [26] Y. Liao, F. Liang,T. A. Lipo, “A novel permanent magnet motor with doubly salient structure,” In Conf. Rec. IEEE IAS Annu .Meeting, Houston, USA, pp.308-314, 1992. [27] R. P. Deodhar, S. Andersson,I. Boldea, “The flux reversal machine: a new brushless doubly-salient permanentmagnet machine,” IEEE Trans. on Industry Application, vol.33, no.4, pp.925-934, 2007. [28] E. Hoang,A. H.Ben-Ahmed, ”Switching flux permanent magnet polyphased machines,” In Proc. Eur. Conf. Power Electron. Appl.of IAS IEEE, Trondheim, Norway, pp.903-908, 1997. [29] M. Cheng, K. T. Chau,C. C.Chan, “Control and operation of a new 8/6-pole doubly salient permanent magnet motor drive, ” IEEE Trans. on Industry Applications,vol.39, no.5, pp.1363-1372, 2003. [30] Z. Q. Zhu,J. T. Chen, “Advanced flux-switching permanent magnet brushless machines,” IEEE Trans. on Magnetics, vol.46, no.6, pp. 1447-1453, 2010. [31] W. Hua, M. Cheng,Z. Q. Zhu, “Analysis and optimization of back EMF waveform of a flux-switching permanent magnet motor,” IEEE Trans. on Energy Conversion, vol.23, no.3, pp.727-733, 2008. [32] Wei Hua, Ming Cheng,Z. Q. Zhu, “Comparison of electromagnetic performance of brushless PM machine having magnets in stator and rotor,” Journal of Applied Physics, vol.103, no.7, 2008, 07F124. [33] Y. Guo, J. G. Zhu, P. A. Watterson,W. Wu, “Design and analysis of a transverse flux machine with soft magnetic composite core,” IEEE Trans. on Energy Conversion, vol.21, no.2, pp.153-157, 2006. |