Wide Speed Range Permanent Magnet Synchronous Generator Design for a DC Power System

Chinese Journal of Electrical Engineering ›› 2017, Vol. 3 ›› Issue (1): 33-41.

Previous Articles Next Articles

Wide Speed Range Permanent Magnet Synchronous Generator Design for a DC Power System

Dongmin Miao^1,2, Yves Mollet¹, Johan Gyselinck¹, Jianxin Shen^2,*

1.Department of Bio, Electro And Mechanical Systems, Université Libre de Bruxelles, Brussels, 1050, Belgium;;
2. Department of Electrical Engineering, Zhejiang University, Hangzhou, 310027, China

Published:2019-11-01
Contact: E-mail: j_x_shen@zju.edu.cn.
About author:Dongmin Miao was born in Hangzhou,China, in 1988. She received the B.Eng. degree from Zhejiang University, Hangzhou, China, in 2007, and the double Ph. D. degrees from Zhejiang University and Université Libre de Bruxelles, Brussels, Belgium, in 2016, all in electrical engineering. Her main research interests include the PM machine design and different motor/generator control strategies. Yves A. B. MOLLET received the master in electromechanical industrial engineering from the Haute Ecole Léonard de Vinci (ECAM), Brussels, Belgium, in 2010. He is currently a Ph. D. student at the Université Libre de Bruxelles, Brussels, Belgium and performs at present a secondment at Siemens Industry Software, Leuven, Belgium. His main research topics include fault detection in wind power systems (using DFIGs and PMSMs) and electrical vehicles. Johan J. C. GYSELINCK received the M.S. degree in electrical and mechanical engineering and the Ph.D. degree in applied sciences from Ghent University, Gent, Belgium, in 1991 and 2000, respectively. From 2000 to 2004, he was a Postdoctoral Researcher at the Applied and Computational Electromagnetics research unit of the University of Liège, Liège, Belgium. He is currently an Associate Professor with the Université Libre de Bruxelles, Brussels, Belgium, and his research mainly concerns the numerical computation of magnetic fields, the simulation and control of electrical machines and drives, and renewable energy systems. Jianxin Shen was born in Huzhou, China, in 1969. He received the B.Eng. and M.Sc. degrees from Xi'an Jiaotong University, Xi'an, China, in 1991 and 1994, respectively, and the Ph. D. degree from Zhejiang University, Hangzhou, China, in 1997, all in electrical engineering. H e w a s w i t h N a n y a n g T e c h n o l o g i c a l University, Singapore(1997-1999), the University of Sheffield, Sheffield, U.K. (1999-2002), and IMRA Europe SAS, U.K. Research Centre, Brighton, U.K. (2002-2004). Since 2004, he has been a Professor of Electrical Engineering with Zhejiang University. Prof. Shen has authored more than 220 technical papers, and holds 39 patents. He received a Prize Paper Award from the IEEE Industry Applications Society and best paper awards from five international conferences, and was a Keynote Speaker for three international conferences. He was the General Chair of two IEEE (co-)sponsored international conferences. His main research interests include topologies, control and applications of permanent magnet machines and drives, and renewable energies. More information of Prof. Shen can be seen at http://mypage. zju.edu.cn/en/jxs. He is the corresponding author and can be contacted at J_X_Shen@zju.edu.cn.
Supported by:
Supported by the National Science Foundation of China (NSFC 51377140) and China Scholarship Council (CSC).

Abstract

Abstract: A wide speed range permanent magnet synchronous generator (PMSG) system is studied in this paper, including the PMSG design and comparative study on control strategies with a pulse width modulation (PWM) rectifier, the purpose of which is to regulate the DC-link voltage. It is of great importance to study the foregoing DC power system based on the PMSG and PWM rectifier, where vector control (VC) can be implemented and the corresponding field-weakening strategy can be realized by injecting a field-weakening current component without any auxiliary devices. Large machine inductance is desired in order to limit the short-circuit current and the loaded voltage drop. Different control strategies including VC, direct torque control (DTC) and direct voltage control (DVC) are studied and compared with both simulations and experiments.

Key words: Wide speed range permanent magnet synchronous generator, PWM rectifier, vector control, field-weakening control, direct torque control, direct voltage control

Dongmin Miao, Yves Mollet, Johan Gyselinck, Jianxin Shen. Wide Speed Range Permanent Magnet Synchronous Generator Design for a DC Power System[J]. Chinese Journal of Electrical Engineering, 2017, 3(1): 33-41.

References

[1] G. C. Lazaroiu, D. Zaninelli, M. O. Popescu,M. Roscia, “Grid connected and stand alone DC power system prototype”, IEEE Int. Conf.Harmonics and Quality of Power, pp. 529-534. 2012.
[2] J. Chen, J. W. Chen, C. Y. Gong,X. Deng, "Energy management and power control for a stand-alone wind energy conversion system,"IEEE Industrial Electronics Society Conf., pp. 989-994, 2012.
[3] X. B. Yuan,Y. D. Li, "Control of variable pitch and variable speed direct-drive wind turbines in weak grid systems with active power balance," IET Renewable Power Generation, vol. 8, no. 2, pp. 119-131, Mar. 2014.
[4] H. Zhang, C. Saudemont, B. Robyns, N. Huttin,R. Meuret, "Stability analysis on the DC power distribution system of more electric aircraft," in Proc.2008 IEEE Power Electronics and Motion Control Conf., pp. 1523-1528.
[5] F. Gao, X. C. Zheng, S. Bozhko, C. I. Hill,G. Asher, "Modal analysis of a PMSG-based DC electrical power system in the more electric aircraft using eigenvalues sensitivity," IEEE Trans. Transportation Electrification, vol. 1, no. 1, pp. 65-76, Jun. 2015.
[6] K. W. Hu,C. M. Liaw, "Incorporated operation control of DC microgrid and electric vehicle," IEEE Trans. Industrial Electronics, in press.
[7] E. Mese, Y. Yasa, H. Akca, M. G. Aydeniz, M. Ayaz,M. Tezcan, "Investigating converter options for automotive grade permanent magnet synchronous generators,"IEEE Electric Power and Energy Conversion Systems Conf., pp. 1-5, 2013.
[8] D. Seyoum, M. F. Rahman,C. Grantham, "Terminal voltage control of a wind turbine driven isolated induction generator using stator oriented field control," IEEE 8th Annual Conference on Applied Power Electronics Conference and Exposition, Miami Beach, FL, USA, 2003, vol.2, pp.846-852.
[9] M. M. Amin,O. A. Mohammed, "DC-bus voltage control of three-phase PWM converters connected to wind powered induction generator,"IEEE Power and Energy Society General Meeting, pp. 1-7, 2010.
[10] M. M. N.Amin, and O. A. Mohammed, "DC-bus voltage control technique for parallel-integrated permanent magnet wind generation systems," IEEE Trans. Energy Conversion, vol. 26, no. 4, pp. 1140-1150, Dec. 2011.
[11] M. M. N.Amin, B. Mirafzal, and O. Mohammed, "A DC-bus voltage regulation for parallel wind-based synchronous generators," Annual Conference of IEEE Industrial Electronics Society, Glendale, AZ, pp. 3161-3166, 7-10 Nov. 2010.
[12] M. M. Amin,O. A. Mohammed, "Design and implementation of DC-bus system module for parallel integrated sustainable energy conversion systems," IEEE Power and Energy Society General Meeting, San Diego, CA, pp. 1-8, 24-29 July 2011.
[13] Z. Zhang, Y. Zhao, W. Qiao,L. Y. Qu, "A space-vectormodulated sensorless direct-torque control for direct-drive PMSG wind turbines," IEEE Trans. Industry Applications, vol. 50, no. 4, pp. 2331-2341, Jul./Aug. 2014.
[14] R. Bojoi, M. G. Neacsu,A. Tenconi, "Analysis and survey of multi-phase power electronic converter topologies for the more electric aircraft applications,"International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Sorrento, Italy, pp. 440-445, 20-22 Jun. 2012.
[15] Y. Deng, S. Y. Foo,I. Bhattacharya, "Regenerative electric power for more electric aircraft," IEEE Southeast CON, Lexington, KY, USA, pp. 1-5, 13-16 Mar. 2014.
[16] Y. Hu, W. Huang,Y. Li, "A novel instantaneous torque control scheme for induction generator systems," IEEE Transactions on Energy Conversion, vol.25, no.3, pp. 795-803, Sep. 2010.
[17] M. Sinnett, "787 no-bleed system: saving fuel and enhancing operational efficiencies," Boeing Aero, qtr_04, 2007, pp. 6-11.
[18] Y. Hu, W. Huang,Y. Li, "A novel instantaneous torque control scheme for induction generator systems," IEEE Transactions on Energy Conversion, vol.25, no.3, pp. 795-803, Sep. 2010.
[19] R. T. Naayagi, "A review of more electric aircraft technology," IEEE International Conference on Energy Efficient Technologies for Sustainability, Nagercoil, India, pp. 750-753, 10-12 Apr. 2013.
[20] J. A. Weimer, "Electrical power technology for the more electric aircraft," AIAA/IEEE Digital Avionics Systems Conference, Fort Worth, TX, USA, pp. 445-450, 25-28 Oct. 1993.
[21] J. A. Weimer, "The role of electric machines and drives in the more electric aircraft," IEEE International Electric Machines and Drives Conference, Madison, Wisconsin, USA, vol. 1, pp. 11-15, 1-4 Jun. 2003.
[22] L. J. He, Y. D. Li,R. G. Harley, "Adaptive multi-mode power control of a direct-drive PM wind generation system in a microgrid," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 1, no. 4, pp. 217-225, Dec. 2013.
[23] D. M. Miao, Y. Mollet, J. Gyselinck,J. X. Shen, "Direct voltage field-oriented control for permanent-magnet synchronous generator systems with an active rectifier," unpublished, will be presented at the IEEE Int. Energy Conf., Leuven, Belgium, 2016.
[24] D. M. Miao, Y. Mollet, J. Gyselinck,J. X. Shen, "DC voltage control of a wide-speed-range permanent-magnet synchronous generator system for more electric aircraft applications," The 13th IEEE Vehicle Power and Propulsion Conference, Hangzhou, China, 17-20 Oct. 2016.

Wide Speed Range Permanent Magnet Synchronous Generator Design for a DC Power System

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Feng guihong,Huang he,Liu xiangyan. Research and Improvement of Permanent Magnet Synchronous Motor Direct Torque Control [J]. Journal of Electrical Engineering, 2018, 13(9): 1-7.
[2]	Zhang Yongchang,Jiao Jian,Liu Jie. Model-Free Predictive Current Control of the Voltage Source PWM Rectifier [J]. Journal of Electrical Engineering, 2018, 13(6): 1-6.
[3]	Binyu Wu, Dezhi Xu, Jinghua Ji, Wenxiang Zhao, Qingwang Jiang. Field-Oriented Control and Direct Torque Control for a Five-Phase Fault-Tolerant Flux-Switching Permanent-Magnet Motor [J]. Chinese Journal of Electrical Engineering, 2018, 4(4): 48-56.
[4]	Liu Hong,Li Hong. Research on Improved Direct Torque Control System of Induction Motor [J]. Journal of Electrical Engineering, 2018, 13(4): 11-17.
[5]	Chunhua Liu, Yixiao Luo. Overview of Advanced Control Strategies for Electric Machines [J]. Chinese Journal of Electrical Engineering, 2017, 3(2): 9-9.
[6]	Jinhai Liu. Modeling and Vector Control of PMSM Based on Parameterized dq0 Coordinate Transformation [J]. Journal of Electrical Engineering, 2017, 12(11): 28-34.
[7]	Wang Xuesong,Xu Aide,Zhao Zhonglin,Zhao Xianchao. Stator Flux Observer of SRM Based on Particle Swarm Optimized Recurrent Neural Network [J]. Journal of Electrical Engineering, 2017, 12(10): 1-8.
[8]	Dong Yan,Guo Xianchao,Jing Kai. Research on the Comparative of the Characteristic of the Driving Load of Voltage Source Rectifier and Current Source Rectifier for Direct Power Control [J]. Journal of Electrical Engineering, 2016, 11(12): 8-15.
[9]	Zhang Yongchang,Gao Jihao. The Analysis on Digital Delay and the Research on Compensation Strategy of Predictive Direct Power Control [J]. Journal of Electrical Engineering, 2016, 11(11): 1-8.
[10]	Yongchang Zhang, Bo Xia, Haitao Yang, and Jose Rodriguez. Overview of Model Predictive Control for Induction Motor Drives [J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 62-76.
[11]	LIU Wenzhi;HUANG Ke;WU Jianxin;TENG Renchao;ZHAO Yongzhong. Contact Load-bearing Performance Analysis for Thrust Vector Control System in a Certain Solid Propellant Rocket Motor [J]. , 2012, 48(19): 148-155.
[12]	LU Hao;LI Yunhua;TIAN Shengli;CHEN Jiantao. μ Synthesis Robust Control of Thrust Vector Control Electric Servo Mechanism Driving Large Inertia and Low Stiffness Load [J]. , 2011, 47(2): 180-188.
[13]	CHEN Xiaoan;KANG Huimin;HE Ye;CHEN Man;MIAO Yingyun;CHEN Wenqu. Dynamic Performance Analysis of High Speed Motorized Spindle under Speed Sensor-less Vector Control [J]. , 2010, 46(7): 96-101.
[14]	ZHANG Zhouyun;SHI Wei;XU Yandong GONG Jun;YING Hongliang. Vector Control System of Permanent Magnet Brushless Motor Based on Discrete Position Signals [J]. , 2010, 46(6): 44-50.
[15]	WU Qinghui;SHAO Cheng. Application of Tracking-differentiator on Stator Flux Estimation for Induction Motor [J]. , 2008, 44(12): 291-295.