Chinese Journal of Electrical Engineering ›› 2016, Vol. 2 ›› Issue (1): 1-12.
Renyuan Tang, Wenming Tong*, and Xueyan Han
Online:2016-01-20
Published:2019-10-31
Contact:
*,E-mail: twm822@126.com
About author:Renyuan Tang was born in Shanghai, China, in 1931. He received the B.S. degree in electrical engineering from Shanghai Jiaotong University, Shanghai, China, in 1952. He is currently a Professor of Shenyang University of Technology and the Director of National Engineering Research Center for Rare-Earth Permanent Magnet Machines, Fellow of Chinese Academy of Engineering. Since 1978, he has been with the Shenyang University of Technology, where his currently major research interests include the design, analysis and control of rare earth permanent magnet machine. He has published 8 books by his chief editor and translator, and over 133 technical papers.Supported by:Renyuan Tang, Wenming Tong, and Xueyan Han. Overview on Amorphous Alloy Electrical Machines and Their Key Technologies[J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 1-12.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
| [1] R. Kolano, A. Kolano-Burian, M. Polak, and J. Szynowski, "Application of rapidly quenched soft magnetic materials in energy-saving electric equipment," IEEE Trans. Magn., vol.50, no. 4, pp.1-4, Apr. 2014. [2] Q. Y. Wang, J. W. Lu, and S. X. Jiang, "Research summary of amorphous alloy motor," Electric Drive for Locomotives, no. 3, pp. 10-13, Mar. 2014. [3] S. R. Ning, J. Gao, and Y. G. Wang, "Review on applications of low loss amorphous metals in motors," Adv. Mater. Res., vol. 43, no.34, pp. 1366-1371, Aug. 2012. [4] G. Q. Zhang, S. X. Zhou, L. J. Wang, S. H. Li, and S. L. Huang, "Advantages and research progress of amorphous alloy motors," Small & Special Electrical Machines, no. 3, pp. 73-78, Mar. 2011. [5] L. J. Wang, Li J. Q., S. H. Li, and G. Q. Zhang, "Development of the new energy-efficient amorphous iron based electrical motor," in Proc. IEEE ICCDCIEM, pp. 2059-2061, Feb. 2011. [6] L. J. Wang, G. Q. Zhang, S. H. Li, S. L. Huang, and S. X. Zhou, "Advantages and prospects of Fe-based amorphous alloy materials applied in motor iron core," Metallic Functional Materials, vol. 17, no. 5, pp. 58-62, May. 2010. [7] W. D. Xu, Q. Deng, and Z. H. Yang, "The application of amorphous material in high efficiency motor," in Proc. The Chinese Society for Metals the 12th ACCES, pp. 247-253, Nov. 2012. [8] X. Y. Han, W. M. Tong, and R. Y. Tang, "The applications of amorphous alloy material in electrical machines," Adv. Technol. Electr Engine. Ener., vol. 33, no. 12, pp. 46-52, Dec. 2014. [9] L. Q. Yuan, D. G. Zhong, and Y. X. Chen, "Amorphous metal motor and its prospects," Small & Special Electrical Machines, no. 4, pp. 34-36, May. 2004. [10] G. J. Chen, G. H. Tu, and W. Lv, "Applications of amorphous/ nanocrystalline soft magnetic materials in high efficient motors," Journal of Magnetic Materials and Devices, vol. 43, no. 2, pp. 1-5, Feb. 2012. [11] V. B. Honsinger, B. Lake, and R. E. Tompkins, "Method apparatus for fabricating amorphous metal laminations for motors and transformers," United States Patent, 4155397. 1979-05-22. [12] G. B. Kliman, "Induction disk motor with metal tape components," United States Patent, 4363988. 1982-10-14. [13] G. B. Kliman, and A. B. Plunkett, "Synchronous disk motor with amorphous metal stator and permanent magnet rotor and flywheel," United States Patent, 4578610. 1986-03-25. [14] W. R. Mischler, G. M. Rosenberry, P. G. Frischmann, and R. E. Tompkins, "Test results on a low loss amorphous iron induction motor," IEEE Trans. Power Appl. Syst., vol. PAS- 100, no. 6, pp. 2907-2911, Jun. 1981. [15] L. A. Johnson, E. P. Cornell, D. J. Bailey, and S. M. Hegyi, "Application of low loss amorphous metals in motors and transformers," IEEE Trans. Power Appl. Syst, vol. PAS-101, no. 7, pp. 2109-2114, Jul. 1982. [16] D. K. Hong, D. Joo, B. C. Woo, Y. H. Jeong, and D. H. Koo, "Investigations on a super high speed motor-generator for microturbine applications using amorphous core," IEEE Trans. Magn., vol. 49, no. 7, pp. 4072-4075, Jul. 2013. [17] Shi Lei, Lu Juan, and Xie Wei, "Producing method of amorphous alloy stator core by modulation," China Patent, CN101800456A. 2010-8-11. [18] L. Shi, "Amorphous alloy switch reluctance motor and its manufacturing method," China Patent, CN103872857A. 2014-6-18. [19] A. D. Hirzel, J. A. Day, B. C. Semones, and Johnston M. R., "Efficient high-speed electric device using low-loss materials: United States Patent, US7067950B2. 2006-06-27. R. Tang et al.: Overview on Amorphous Alloy Electrical Machines and Their Key Technologies 11 [20] A. D. Hirzel "Stator coil arrangement for an axial airgap electric device including low-loss materials," United States Patent, US7190101B2. 2007-03-13. [21] A. D. Hirzel Efficient high-speed electric device using lowloss materials: United States Patent, US7230361B2. 2007-06-12. [22] N. J. Decristofaro, S. M. Lindquist, S. S. Renduchintala, C. E. Kroger, Unitary amorphous metal component for an axial flux electric machine: United States Patent, US6803694B2. 2004-10-12. [23] G. Q. Zhang, S. X. Zhou, S. H. Li, L. J. Wang, and Z. C. Lu, "Preparation of an amorphous stator core for motor and its magnetic properties," Small & Special Electrical Machines, no. 12, pp. 68-70, Dec. 2011. [24] G. M. Li, D. R. Li, X. J. Ni, X. H. Bo, and Z. C. Lu, "Study of novel amorphous core used for motor stator," J. Fun. Mater. Dev., vol. 18, no. 3, pp. 232-237, Jun 2012. [25] T. J. Berwald, and K. S. Page, "Product and method for making a three dimensional amorphous metal mass," United States Patent, US7018498B2. 2006-03-28. [26] T. J. Berwald, and K. S. Page, "Soft-metal electromechanical component and method making same," United States Patent, US0032141A1. 2009-02-05. [27] G. Q. Zhang, S. X. Zhou, B. S. Dong, Z. Z. Li, and H. Gao, "Amorphous alloy and nanocrystalline stator core of axial flux motor and their manufacturing method," China Patent, CN105490400A. 2016-04-13. [28] G. Q. Zhang, S. X. Zhou, B. S. Dong, Z. Z. Li, and H. Gao, "Amorphous alloy and nanocrystalline stator core used in axial flux motors and their manufacturing method," China Patent, CN105471202A. 2016-04-06. [29] G. S. Liew, N. Ertugrul, W. L. Soong, and J. Gayler, "An investigation of advanced magnetic materials for axial field brushless permanent magnet motor drives for automotive applications," in Proc. IEEE CPES, pp. 1-7, Jul. 2006. [30] G. S. Liew, W. L. Soong, N. Ertugrul, and J. Gayler, "Analysis and performance investigation of an axial-field PM motor utilising cut amorphous magnetic material," in Proc. IEEE The 20th ACUPE, pp 1-6, Dec. 2010. [31] N. Ertugrul, R. Hasegawa, W. L. Soong, J. Gayler, S. Kloeden, and S. Kahourzade, "A novel tapered rotating electrical machine topology utilizing cut amorphous magnetic material," IEEE Trans. Magn, vol. 51, no. 7, 8106006, Jul. 2015. [32] N. J. DeCristofaro, P. J. Stamatis, and G. E. Fish, "Bulk amorphous metal magnetic components for electric motors," United States Patent, US6462456B1. 2002-10-08. [33] N. J. DeCristofaro, G. E. Fish, S. M. Lindquist, Nicholas J., and S. M. Lindquist. Low core loss amorphous metal magnetic components for electric motors," United States Patent, US6784588B2. 2004-08-31. [34] N. J. DeCristofaro, D. A. Ngo, J. R. Bye, P. J. Stamatis, and G. E. Fish, "Amorphous metal stator for a radial-flux electric motor," United States Patent, US6960860B1. 2005-11-01. [35] Y. Enomoto, M. Ito, H. Koharagi, R. Masaki, C. Ishihara, and M. Mita, "Evaluation of experimental permanent-magnet brushless motor utilizing new magnetic material for stator core teeth," IEEE Trans. Magn, vol. 41, no. 11, pp. 4304- 4308, Apr. 2005. [36] R. A. Caamano, "Electric motor or generator," United States Patent, 5814914. 1998-09-29. [37] R. A. Caamano, "Electric motor or generator having laminated amorphous metal core," United States Patent, 5903082. 1999-05-11. [38] R. A. Caamano, "Electric motor and generator having amorphous core pieces being individually accommodated in a dielectric housing," United States Patent, 5986378, 1999-11-16. [39] Z. N. Wang, Y. Enomoto, M. Ito, R. Masaki, S. Morinaga, H. Itabashi, and S. Tanigawa, "Development of a permanent magnet motor utilizing amorphous wound cores," IEEE Trans. Magn., vol. 46, no. 2, pp.570-573, Feb. 2010. [40] Z. N. Wang, R. Masaki, S. Morinaga, Y. Enomoto, H. Itabashi, and S. Tanigawa, "Development of an axial gap motor with amorphous metal cores," IEEE Trans. Magn, vol. 47, no. 3, pp.1293-1299, Nov. 2011. [41] Y. K. Huang, J. N. Dong, L. Jin, and H. Y. Lin, "One kind of axial flux permanent magnet motor using modulated amorphous alloy stator cores," China Patent, CN202231590. 2012-05-23. [42] S. J. Collocott, J. B. Dunlop, P. B. Gwan, H. C. Lovatt, and B. A. Kalan, "Applications of rare-earth permanent magnets in electrical machines: from motors for niche applications to hybrid electric vehicles," in Proc. Magnetic Materials and Devices Industry Association CCMMDA, pp. 1-17, Apr 2004. [43] L. Shi, W. Xie, "The radial flux path amorphous alloy motor and its manufacturing method," China Patent, CN101976895A. 2011-02-16. [44] R. Kolano, K. Krykowski, A. Kolano-Burian, M. Polak, J. Szynowski, and P. Zackiewicz, "Amorphous soft magnetic materials for the stator of of novel high-speed PMBLDC motor," IEEE Trans. Magn, vol. 49, no. 4, pp.1367-1371, Apr. 2013. [45] R. Kolano, A. Kolano-Burian, K. Krykowski, J. Hetmańczyk, M. Hreczka, M. Polak, and J. Szynowski, "Amorphous soft magnetic core for the stator of the high-speed PMBLDC motor with half-open slots," IEEE Trans. Magn, Browse Early Access Articles, Jun 2016. [46] Z. Wang, Y. Enomoto, R. Masaki, K. Souma, H. Itabashi, and S. Tanigawa, "Development of a high speed motor using amorphous metal cores," in Proc. IEEE ICPE, pp. 1940-1945, Jun 2011. [47] L. Shi, Q. S. Liu, and W. Xie, "The disk type motor with amorphous alloy axial flux path and its manufacturing method and stator units," China Patent, CN103296792A. 2013-09-11. [48] L. Shi, Q. S. Liu, and W. Xie, "The disk type motor with amorphous alloy axial flux path and its stator units," China Patent, CN202435153U. 2012-09-12. [49] L. Shi, "Amorphous alloy motor, stator core and its units," China Patent, CN205029444U. 2016-02-10. [50] Q. Gui, "Researches on the components, processes and performances of 1K101 amorphous alloy ribbon," Central Iron & Steel Research Institute, May. 2012. [51] M. L. Song, D. F. Zhang, X. W. Chen, and C. S. Chuan, "The influence of heat-treatment technique on properties of Fe-based amorphous alloy," Journal of Southwest Petroleum University, vol. 29, no. 11, pp. 147-149, Nov. 2007. [52] H. Ru, "Research on high efficiency Fe-based amorphous three phase asynchronous motor," Dissertation,Weihai, Shandong University, May. 2012. [53] H. Zhang, "Research on Y2-632-4 type amorphous alloy motor and design of wound devices of amorphous alloy cores," Dissertation, Weihai, Shandong University, May. 2013. [54] S. L. Huang, S. H. Li, J. Yu, G. Zhang, and Wang Let, "Epoxy resin and curing agent that applicable to amorphous stator core," Engineering Plastics Application, vol, 39, no. 1, pp. 104-106, Jan. 2011. [55] S. H. Li, D. R. Li, Z. C. Lu, and S. X. Zhou, "Effect of insulating coating on the core losses of amorphous metallic cores," Metallic Functional Materials, vol. 15, no. 6, pp. 4-6, Jun. 2008. [56] J. L. Liu, Z. H. Zhu, L. Yin, X. M. Li, and Z. Hu, "Effect of wire saw technic on the soft magnetic properties of Fe78Si9B13 amorphous alloy under line frequency," Journal of Nanchang University, vol 36, no. 4, pp. 351-354. Apr. 2012. [57] S. Derlecki, Z. KUSMIEREK, D. Maria, and J. Szulakowski, "Magnetic properties of amorphous materials used as corps of electric machines," Electrical Review, vol. 88, no. 5a, pp. 10-13, Jan. 2012. [58] A. Chiba, H. Hayashi, K. Nakamura, and S. Ito, "Test results of an SRM made from a layered block of heat-treated amorphous alloys," IEEE Trans. Ind. Appl, vol. 44, no.3, pp. 699-706, May 2008. [59] S. Derlecki, Z. Kusmierek, M. Dems, and J. Szulakowski, "Magnetic properties of amorphous materials used as corps of electric machines," Electrical Review, vol. 88, no.5, pp. 10-13, Jan, 2012. [60] H. Hayashi, A. Chiba, and T. Fukao, "Efficiency comparison of switched reluctance motors with low loss materials," in Proc. IEEE PESGM, pp. 1-6, Jun. 2007. [61] L. F. Zhu, J. G. Zhu, W. M. Tong, and X. Y. Han, "Study on no-load losses of permanent magnet synchronous motor with amorphous alloy stator core," Electric Machines and Control, vol. 19, no 7, pp. 21-26, Jul. 2015. [62] S. H. Li, Z. C. Lu, D. R. Li, C. W. Lu, and S. X. Zhou, "Investigation on the core loss of amorphous stator core for high-speed motor," Small & Special Electrical Machines, no. 6, pp. 24-25, Jun. 2009. [63] L. J. Li, S. H. Li, G. M. Li, D. R. Li, and Z. C. Lu, "Design and performance prediction of switched reluctance motor with amorphous cores," Mater. Res. Inno., vol. 19, no. S3, pp. 28-32, May. 2015. [64] J. Li, J. W. Leng, and C. N. Qu, "Research on a novel Fe-based amorphous electric motor," in Proc. IEEE ICCSIT, pp. 184-187, Jul. 2010. [65] J. W. Leng, X. H. Qi, and J. F. Li, "The high frequency characteristic of amorphous iron induction motor," in Proc. IEEE ICCCTAE, pp. 439-442, Jun. 2010. [66] Q. Y. Wang, C. M. Li, and J. W. Lu, "Numerical analysis of mechanical properties and electromagnetic character of amorphous motor," Electric Machines and Control Applications, vol. 42, no. 3, pp. 13-16, Mar. 2015. [67] T. Fukao, A. Chiba, and M. Matsui, "Test results on a superhigh- speed amorphous-iron reluctance motor," IEEE Trans. Ind. Appl., vol. 25, no. 1, pp. 119-125, Jan. 1989. [68] S. Okamato, N. Denis, Y. Kato, and K. Fujisaki, "Core loss reduction of an interior permanent magnet synchronous motor using amorphous stator core," IEEE Trans. Ind. Appl., Browse Early Access Articles, May. 2016. [69] J. M. Silveyra, P. Xu, V. Keylin, V. Degeorge, and A. Leary, "Amorphous and nanocomposite materials for energy-efficient electric motors," Journ. Electron. Mater., vol. 45, no. 1, pp. 219-225, Aug. 2016. [70] FY2008 Annual Progress Report for the Power Electronics and Electric. Mach., U.S, Dept. Energy, Washington, DC, USA. [71] M. Dems, and K. Komeza, "Performance characteristics of a high-speed energy-saving induction motor with an amorphous stator core," IEEE Trans. Ind. Electro., vol. 61, no. 6, pp. 3046-3055, Jun. 2014. [72] W. M. Tong, X. F. Zhu, L. F. Zhu, H. H. Li, "The impact of different supply modes on core losses of amorphous alloy permanent magnet synchronous motor," Trans. China Electro. Society, vol. 30, no. 10, pp. 115-122,May. 2015. [73] P. I. Anderson, A. J. Moses, and H. J. Stanbury, "Assessment of the stress sensitivity of magnetostriction in grain-oriented silicon steel," IEEE Trans. Magn. Vol.43, no. 8, pp. 3467- 3476, Aug. 2007. [74] C. G. Kim, H. C. Kim, S. J. Ahn, S. Y. Cha, and S. K. Chang, "Magnetizing angle dependence of harmonics of magnetic induction and magnetostriction in electrical steel," J. Magn. Magn. Mater, vol. 215-216, pp. 159-161, Jun. 2000. [75] S. N. Wu, R. Y. Tang, X. Y. Han, W. M. Tong, Z. Zhang, and J. Chen, "Research on vibration and noise of amorphous metal wound cores," Trans. China Electro. Society, vol. 30, no. 11, pp. 13-21, Jun. 2015. [76] S. N. Wu, R. Y. Tang, X. Y. Han, W. M. Tong, S. L. Shu, and J. Chen, "Analytical calculation of vibration due to magnetostriction in permanent magnet machines with amorphous metal cores," Proceedings of the CSEE., vol. 36, no. 13, pp. 3635-3641, Nov. 2016. [77] A. D. Hirzel, "Synchronous design frequency as a free variable in permanent magnet brushless motors in effort to achieve optimal torque density," ICEMS, pp. 983-988, Jul. 2007. [78] T. Fan, Q. Li, and X. Wen, "Development of a High Power Density Motor Made of Amorphous Alloy Cores," IEEE Trans. Ind. Electron., vol. 61, no. 9, pp. 4510-4518, Sep. 2014. |
| [1] | WANG Weiguang,FU Song,WANG Zeyu,LI Yang,QIN Guangyu,LIANG Yanping. Study of Core Design and Ventilation Distribution of Circulating Pump Motor in Nuclear Power Plant [J]. Journal of Electrical Engineering, 2019, 14(2): 71-78. |
| [2] | HU Bo,HUANG Shaobo,ZHOU Jin,ZHANG Yue,XIE Zhihui,YANG Shuai,HUANG Ze. Study of Measuring Method of Dielectric Loss of Stator Coil of Generator by Three-electrode Spurious System with Subsection Type [J]. Journal of Electrical Engineering, 2019, 14(2): 103-107. |
| [3] | LI Xiaolong, XIE Changjun, HUANG Liang, QUAN Shuhai, FANG Wei. Maximum Power Point Tracking Based on a New Hybrid Method for Automobile Exhaust Thermoelectric Generators [J]. Journal of Mechanical Engineering, 2019, 55(16): 132-140. |
| [4] | CHEN Yonghui, ZHANG Xueliang, WEN Shuhua, LAN Guosheng. Fractal Model for Normal Contact Damping of Joint Surface Considering Elastoplastic Phase [J]. Journal of Mechanical Engineering, 2019, 55(16): 58-68. |
| [5] | SHOU Mengjie, LIAO Changrong, YE Yuhao, ZHANG Honghui, FU Benyuan, XIE Lei. Dynamic Behavior of Magnetorheological Energy Absorber under Impact Loading [J]. Journal of Mechanical Engineering, 2019, 55(1): 72-80. |
| [6] | Yang Jiangfei,Guan Hua,Yang Chunhua,Bao Xiaohua. Influence of Load Variation on Performance of Permanent Magnet Synchronous Motor [J]. Journal of Electrical Engineering, 2018, 13(9): 20-25. |
| [7] | Wang Dapeng,Ma Tian. Loss and Temperature Field Analysis of Permanent Magnet Brushless DC High Speed Motor With Two Rotor Structures [J]. Journal of Electrical Engineering, 2018, 13(8): 12-17. |
| [8] | HUANG Zhenyu, WEI Haijun, ZHANG Xusheng, CAO Xiongtao. Investigation of the Internal Flow Characteristics and the Loss Mechanisms in the Supersonic Expander-rotor [J]. Journal of Mechanical Engineering, 2018, 54(8): 202-209. |
| [9] | Xintong Zhang, Pengrui Fu, Yiguang Ma, Chengming Zhang, Liyi Li. No-Load Iron Loss Model for a Fractional-Slot Surface-Mounted Permanent Magnet Motor Based on Magnetic Field Analytical Calculation [J]. Chinese Journal of Electrical Engineering, 2018, 4(4): 71-79. |
| [10] | ZHANG Yumei, WANG Ruiqian, LI Ye, LI Ming, WEN Zefeng, XIAO Xinbiao. Study on Sound Transmission Loss of Windows on High Speed Trains [J]. Journal of Mechanical Engineering, 2018, 54(4): 212-221. |
| [11] | Yang Jian,Zhang Qiaojie. Research on Improved Inductance Voltage Sharing Circuit of Series Battery Pack [J]. Journal of Electrical Engineering, 2018, 13(4): 18-25. |
| [12] | SUN Yanhong, ZHANG Jie, HAN Jian, GAO Yang, XIAO Xinbiao. Acoustic Transmission Characteristics and Optimum Design of the Wind Ducts of High-speed Train [J]. Journal of Mechanical Engineering, 2018, 54(24): 129-137. |
| [13] | ZHANG Fan, YUAN Shouqi, WEI Xueyuan, CHEN Ke. Study on Flow Loss Characteristics of Side Channel Pump Based on Entropy Production [J]. Journal of Mechanical Engineering, 2018, 54(22): 137-144. |
| [14] | FU Bing, ZHOU Yunshan, HU Xiaolan, LI Hangyang, LIU Yunfeng, ZHANG Feitie. Friction Loss of Steel Rings in Metal V-belt CVT [J]. Journal of Mechanical Engineering, 2018, 54(14): 169-178. |
| [15] | Hu Yunpeng,Bao Xiaohua,Zhang Cheng,Chen Yuanyang,Gao Ge. Magnetic-Thermal Coupling Analysis of Air-Core Reactor in EAST Fast Control Power Supply [J]. Journal of Electrical Engineering, 2017, 12(4): 1-9. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
