Chinese Journal of Electrical Engineering ›› 2016, Vol. 2 ›› Issue (2): 1-13.
Fengge Zhang, Siyang Yu*, Hao Wang, Yutao Wang, Dapeng Wang
Published:2019-11-01
Contact:
Email: yusiyangnuli@163.com.
About author:Fengge Zhang was born in Hebei, Chian, in 1963. He received his B. S., M. S., and Ph. D. degrees in Electrical Engineering from Shenyang University of Technology, Shenyang, China, in 1984, 1990 and 2000, respectively. Since 1984, Prof. Zhang has been with ShenyangUniversity of Technology, where he is currently aProfessor at the School of Electrical Engineering. He was a Visiting Scholar at Esslingen Universityof Applied Sciences, Esslingen am Neckar, Germany, fromOctober 2001 to July 2002. His teaching and research interests include electric-magnetic theory, dynamic simulation, magnetic fieldanalysis, optimized design, computer control technology of electrical machines,and wind power generating systems. He is also active in the area of powerconverters for variable-speed control and drive systems. Siyang Yu was born in Liaoning, China, in 1988. He received his B. S. degree in Electrical Engineering from Shenyang University of Technology, Shenyang, China, in 2011. He received his M. S. degrees from both Kyungsung University, Busan, Korea, and Shenyang University of Technology, Shenyang, China, in 2014. He is currently working toward the Ph. D. degree in Electrical Engineering at Shenyang University of Technology, Shenyang, China. His current research interests include special machine design, electric machine control and wind power generation. Hao Wang was born in Shanxi, China, in 1990. He received his B.S. degree from Shenyang University of Technology, Shenyang, China, in 2014. He is currently working toward the M. S. degree at Shenyang University of Technology, Shenyang, China. His research interests include special machine design and wind power generation. Yutao Wang was born in Henan, China, in 1993. He received his B.S. degree from Shenyang University of Technology, Shenyang, China, in 2016.He is currently working toward the M. S. degree at Shenyang University of Technology, Shenyang, China. His research interests include special machine design and wind power generation. Dapeng Wang was born in Liaoning, China, in 1976.He received his B.S. degree from Lanzhou Jiaotong University, Lanzhou, China, in 1998.He received his M. S. and Ph. D. degrees from Shenyang University of Technology, Shenyang, China, in 2007 and 2012, respectively. His research interests include special machine design and special motor control.
Supported by:Fengge Zhang, Siyang Yu, Hao Wang, Yutao Wang, Dapeng Wang. Overview of Research and Development Status of Brushless Doubly-Fed Machine System[J]. Chinese Journal of Electrical Engineering, 2016, 2(2): 1-13.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
| [1] Y. F. Liao, L. Y. Xu,L. Zhen, “Design of a doubly fed reluctance motor for adjustable-speed drives,” [2] M. S. Boger, A. K. Wallace,R. Spee, “Investigation of appropriate pole number combinations for brushless doubly fed machines applied to pump drives,” [3] S. Ademi, M. G. Jovanović,M. Hasan, “Control of brushless doubly-fed reluctance generators for wind energy conversion systems,” [4] L. Y. Xu, B. Guan, H. J. Liu, L. Gao,K. Tsai, “Design and control of a high-efficiency doubly-fed brushless machine for wind power generator application,” in [5] X. M. Deng, J. G. Jiang, X. J. Wu,R. H. Fang, “Reactive power and stability of brushless doubly-fed machine with cage rotor,” [6] L. Han, Q. Gao, C. Y. Luo,L. D. Xie, “Cage rotor structure effect on magnetic field modulation of brushless doubly-fed machine,” [7] X. M. Deng,R. H. Fang,K. Wang,and X. Zhan, “Finite element analysis of brushless doubly-fed machine with equidistant cage rotor,” [9] H. J. Liu,L. Y. Xu, “Design and performance analysis of a doubly excited brushless machine with radially laminated magnetic barrier rotor,” [10] J. G. Liu, L. Zhao, S. G. Huang,Q. J. Wu, “Contrastive analysis of magnetic field between salient pole and axially laminated anisotropic reluctance brushless doubly-fed machine,” [11] A. M. Knight, R. E. Betz,D. Dorrell, “Design principles for brushless doubly fed reluctance machines,” in [12] F. Xiong,X. F. Wang, “Design of a low-harmonic-content wound rotor for the brushless doubly fed generator,” [13] X. F. Wang, “A new brushless doubly-fed machine with a wound-rotor changing-pole winding,” [14] F. Xiong, X. F. Wang,Y. Cheng, “Studies of brushless doubly-fed machines with an unequal-turn coil rotor structure,” [15] F. G. Zhang, S. Y. Yu, X. P. Wang, H. Wang,S. Jin, “research of a novel brushless doubly-fed generator with hybrid rotor,” [16] X. P. Wang, F. G. Zhang, Q. Yang,G. W. Liu, “Performance analysis on a novel brushless doubly fed machine with hybrid rotor structure,” in [17] P. Han, M. Cheng,R. S. Luo, “Design and analysis of a brushless doubly-fed induction machine with dual-stator structure,” [18] P. Han, M. Cheng, X. C. Wei,N. Li, “Modeling and performance analysis of a dual-stator brushless doubly fed induction machine based on spiral vector theory,” [19] F. G. Zhang, X. W. Ju,H. Liu, “Electromagnetic design of 5MW dual-stator brushless doubly-fed generator with hybrid rotor,” in [20] D. Zhou, R. Spee,A. K. Wallace, “Laboratory control implementations for doubly-fed machines,” in [21] J. Poza, E. Oarbide, D. Roye,I. Sarasola, “Stability analysis of a BDFM under open-loop voltage control,” in [22] I. Sarasola, J. Poza, E. Oyarbide,M. A. Rodriguez, “Stability analysis of a brushless doubly-fed machine under closed loop scalar current control,” in [23] T. Long, S. Y. Shao, T. Logan,R. McMahon, “A novel vector control approach for single phase brushless doubly fed machine,” in [24] S. Ademi,M. G. Jovanović, “Vector control methods for brushless doubly fed reluctance machines,” [25] S. Y. Shao, E. Abdi, R. McMahon, “Vector control of the brushless doubly-fed machine for wind power generation,” in [26] M. G. Jovanovic,J. Yu, “An optimal direct torque control strategy for brushless doubly-fed reluctance motors,” in [27] M. G. Jovanovic, J. Yu,E. Levi, “Direct torque control of brushless doubly fed reluctance machines,” [28] S. J. Fattahi,A. A. Khayyat, “Direct torque control of brushless doubly-fed induction machines using fuzzy logic,” in [29] J. F. Hu, J. G. Zhu,D. G. Dorrell, “A new control method of cascaded brushless doubly fed induction generators using direct power control,” [30] L. C. Zhu, F. G. Zhang, S. Jin, S. Y. Yu, Z. X. Xing, S. Ademi,W. P. Cao, “Direct power control with common mode voltage elimination for open-winding brushless doubly-fed wind power generators,” in [31] S. Jin,X. K. Ren, “Direct power control strategy based on fuzzy control of brushless doubly-fed generator,” [32] M. F. Li, P. Xiao, Y. J. Li,H. He, “Direct torque control for brushless doubly-fed machine based on fuzzy-PI regulator,” [33] Siemens Brothers& Co.Ltd. and Francis Lydall. Improvements inpolyphase induction motors. British Patent No.: 16839, July 1902. [34] L. J. Hunt, “A new type of induction motor,” [35] M. B. Field, H. W. Wilson,L. J. Hunt, “Discussion on 'a new type of induction motor',” [36] L. J. Hunt, “The cascade induction motor,” [37] E. Rosenberg, W. Cramp, F. C. Aldous, W. B. Shaw, E. W. Marchant, J. L. Hunt, R. Pohl, H. H. Wright, W. E. Burnand, J. C. B.Ingleby, and L. J. Hunt, “Discussion on the cascade induction motor,” [38] F. Creedy, “Some developments in multi-speed cascade induction motors,” [39] A. R. W.Broadway, and L. Burbridge, “Self-cascaded machine: a low-speed motor or high-frequency brushless alternator,” [40] A. R. W.Broadway, “Cageless induction machine,” [41] A. R. W.Broadway, B. J. Cook, and P. W. Neal, “Brushless cascade alternator,” [42] R. Spee, A. K. Wallace,H. K. Lauw, “Performance simulation of brushless doubly-fed adjustable speed drives,” in [43] A. K. Wallace, R. Spee,H. K. Lauw, “Dynamic modeling of brushless doubly-fed machines,” in [44] G. C. Alexander, “Characterization of the brushless, doublyfed machine by magnetic field analysis,” in [45] R. Li, A. Wallace,R. Spee, “Dynamic simulation of brushless doubly-fed machines,” [46] S. Williamson, A. C. Ferreira,A. K. Wallace, “Generalised theory of the brushless doubly-fed machine. I. analysis,” [47] S. Williamson,A. C. Ferreira, “Generalised theory of the brushless doubly-fed machine. part 2: model verification and performance,” [48] L. Xu, F. Liang,T. A. Lipo, “Transient model of a doubly excited reluctance motor,” [49] W. R. Brassfield, R. Spee,T. G. Habetler, “Direct torque control for brushless doubly-fed machines,” in [50] D. Zhou,R. Spee, “Synchronous frame model and decoupled control development for doubly-fed machines,” in [51] D. Zhou, R. Spee, G. C. Alexander,A. K. Wallace, “A simplified method for dynamic control of brushless doublyfed machines,” in [52] D. Zhou,R. Spee, “Field oriented control development for brushless doubly-fed machines,” in [53] F. Barati, R. McMahon, S. Y. Shao, E. Abdi,H. Oraee, “Generalized vector control for brushless doubly fed machines with nested-loop rotor,” [54] J. Poza, E. Oyarbide, I. Sarasola,M. Rodriguez, “Vector control design and experimental evaluation for the brushless doubly fed machine,” [55] S. D. Huang, Y. N. Wang, K. Y. Huang,Y. J. Lin, “Study of the control strategy on rotor field orientation for brushless doubly-fed machine,” [56] J. H. Yang, H. Z. Lv, J. Wu,J. M. Yang, “Direct torque control strategy for brushless doubly-fed machines based on popov hyperstability theory,” [57] F. G. Zhang, S. Jin, W. Zhang, “Direct torque control for brushless doubly-fed wind power generator based on speed sensorless,” [58] W. R. Brassfield, R. Spee,T. G. Habetler, “Direct torque control for brushless doubly-fed machines,” [59] S. C. Yang, “Winding configurations of brushless doubly-fed machines for adjustable speed drives,” [60] G. C. Alexander, “Characterization of the brushless, doubly-fed machine by magnetic field analysis,” in [61] X. Y. Yang,Q. F. Li, “Windings design for one set windings of brushless doubly-fed machines,” [62] X. Peng, A. L. Shi,Y. J. Li, “Design of stator winding for brushless double-feed motor,” [63] F. G. Zhang, F. X. Wang,Z. Wang, “Comparative experiment study on the performance of doubly-fed brushless machine with different rotor structures,” [64] R. Li, R. Spee, A. K. Wallace,G. C. Alexander, “Synchronous drive performance of brushless doubly-fed motors,” [65] M. S. Boger, A. K. Wallace, R. Spee,R. Li, “General pole number model of the brushless doubly-fed machine,” [66] S. Williamson,M. S. Boger, “Impact of inter-bar currents on the performance of the brushless doubly fed motor,” [67] A. C. Ferreira,S. Williamson, “Time-stepping finiteelement analysis of brushless doubly fed machine taking iron loss and saturation into account,” [68] R. McMahon, P. Tavner, E. Abdi, P. Malliband and D. Barker, “Characterising brushless doubly fed machine rotors,” [69] M. N. Hashemnia, F. Tahami, P. Tavner,S. Tohidi, “Steady-state analysis and performance of a brushless doubly fed machine accounting for core loss,” [70] D. Basic, J. G. Zhu,G. Boardman, “Transient performance study of a brushless doubly fed twin stator induction generator,” [71] M. G. Jovanovic, J. Yu,E. Levi, “Encoderless direct torque controller for limited speed range applications of brushless doubly fed reluctance motors,” [72] D. G. Dorrell, A. M. Knight, W. K. Song,R. E. Betz, “Saturation and ducting effects in a brushless doubly-fed reluctance machine,” [73] D. G. Dorrell, A. M. Knight,R. E. Betz, “Improvements in brushless doubly fed reluctance generators using highflux- density steels and selection of the correct pole numbers,” [74] H. J. Liu,L. Y. Xu, “Analysis of doubly excited brushless machine with radially laminated magnetic barrier rotor,” in [75] F. G. Zhang, X. P. Wang, G. L. Jia,S. Jin, “Optimum design for composite rotor structural parameters of brushless doubly fed machines,” [76] S. C. Yang, “Modeling of brushless doubly fed machines for adjustable speed drives,” [77] W. Zhang,Y. K. He, “The Analysis of the electro magnetic machanism of brushless doubly fed machine,” [78] W. Zhang,Y. K. He, “Analysis of brushless doubly-fed machine's electromagnetic mechanism,” [79] X. M. Deng, J. G. Jiang,R. H. Fang, “Electromagnetic analysis and equivalent circuit of brushless doubly-fed machine with cage rotor,” [80] X. Y. Yang,Q. F. Li, “Hybrid reference frame model of brushless doubly-fed machines for adjustable speed drives,” [81] A. L. Zhang, G. Y. Xiong, Z. F. Liu, J. H. Wang,Z. Q. Zhou, “Experimental study on energy transmission and power factor characteristics of brushless doubly-fed machines,” [82] A. Oraee,E. Abdi,S. Abdi,R. McMahon,P. J. Tavner, “Effects of rotor winding structure on the BDFM equivalent circuit parameters,” [83] E. Abdi,R. McMahon,P. Malliband,S. Y. Shao, M. E. Mathekga, P. Tavner, S. Abdi, A. Oraee, T. Long,M. Tatlow, “Performance analysis and testing of a 250kW mediumspeed brushless doubly-fed induction generator,” [84] F. G. Zhang, Z. Wang,F. X. Wang, “Study on the parameter calculation method and the rotor craftwork of the doubly-fed brushless wind-power generator with ALA rotor,” [85] A. M. Knight, R. E. Betz,D. G. Dorrell, “Design and analysis of brushless doubly fed reluctance machines,” [86] Y. G. Guo, X. F. Wang, J. G. Zhu,H. Y. Lu, “Development of a wound rotor brushless doubly fed machine based on slot MMF harmonics,” in [87] F. Xiong, X. F. Wang, J. W. Zhang,C. H. Kan, “Chain equivalent circuit model of wound-rotor brushless doubly-fed machine,” [88] Z. S. Du,T. A. Lipo, “Dynamics and vector control of wound-rotor brushless doubly fed induction machines,” in [89] S. Khaliq, S. Atiq, T. A. Lipo,B. I. Kwon, “Rotor pole optimization of novel axial flux brushless doubly fed reluctance machine for torque enhancement,” [90] X. M. Deng,J. G. Jiang, “The principle and electromagnetic design of brushless doubly-fed machines,” [91] S. C. Yang, “Feature of electromagnetic design for brushless doubly-fed machines,” [92] A. L. Zhang, W. X. Jia, Z. Q. Zhou, X. Wang,J. H. Wang, “Direct torque control for brushless doubly-fed induction machine in static reference frame,” [93] M. Jovanovic, “Sensored and sensorless speed control methods for brushless doubly fed reluctance motors,” [94] A. L. Zhang, X. Wang, W. X. Jia,Y. Ma, “Indirect statorquantities control for the brushless doubly fed induction machine,” [95] S. D. Huang, Y. N. Wang, Y. Wang,J. Gao, “A study of active and reactive power control for brushless doubly-fed machine,” [96] L. Han, Q Gao, C. Y. Luo, and H. Li, “Comparasion on the performance of brushless doubly-fed machine with different rotor structures,” [97] X. Wu,S. H. Wang,H. Lü,and G. F. Han, “Comparison on the asynchronously performance of brushless doubly-fed machine with different rotor structure,” [98] R. Carlson,H. Voltolini,F. Ruencos,P. K. Peng,N. J. Batistela, “Performance analysis with power factor compensation of a 75kW brushless doubly fed induction generator prototype,” in [99] H. Gorginpour,B. Jandaghi,and H. Oraee, “A novel rotor configuration for brushless doubly-fed induction generators,” [100] L. Y. Xu, Y. F. Tang,L. Ye, “Comparison study of rotor structures of doubly excited brushless reluctance machine by finite element analysis,” [101] A. M. Knight, R. E. Betz, W. K. Song,D. G. Dorrell, “Brushless doubly-fed reluctance machine rotor design,” in [102] T. Staudt, F. Wurtz, N. J. Batistela,P. K. Peng, “Influence of rotor design and geometric parameter variation on global performance of brushless doubly-fed reluctance machines,” in [103] M. F. Hsieh, I. H. Lin,D. Dorrell, “Magnetic circuit modeling of brushless doubly-fed machines with induction and reluctance rotors,” [104] F. X. Wang, F. G. Zhang,L. Y. Xu, “Parameter and performance comparison of doubly fed brushless machine with cage and reluctance rotors,” [105] X. Chen, Z. C. Wei, X. M. Gao, C. Y. Ye,X. F. Wang, “Research of voltage amplitude fluctuation and compensation for wound rotor brushless doubly-fed machine,” [106] J. W. Zhang, X. F. Wang, T. Wu, F. Xiong,C. H. Kan, “The principle and harmonic analysis of a new BDFM with tooth harmonic wound rotor using as a generator,” in [107] Y. Cheng, X. F. Wang, F. Xiong, J. W. Zhang,C. H. Kan, “Performance for wound-rotor brushless doubly-fed machine taking saturation into account,” [108] G. Z. Li, X. P. Ding, Q. H. Xiao,F. Zhou, “Study on rotor magnetomotive force comparison of doubly-fed brushless machine with cage rotor or wound rotor,” in [109] E. M. Schulz,R. E. Betz, “Optimal rotor design for brushless doubly fed reluctance machines,” in [110] L. Z. Ji,X. Y. Yang, “Optimization design on salient pole rotor of BDFRM using the Taguchi method,” in [111] F. G. Zhang, X. P. Wang, S. Y. Yu,C. Y. Qu, “Comparative analysis and experimental research of coupling capability and operating characteristics for brushless doubly fed motors with different rotor structures,” [112] J. Du, L. Han, X. P. Ou,X. F. Han, “Experimental study of brushless doubly-fed machine with cage rotor at the asynchronous operation mode,” [113] F. G. Zhang, F. X. Wang,C. W. Lin, “The structure feature and design principle of doubly-fed brushless machine,” [114] F. G. Zhang, X. P. Wang,Y. Qi, “Effect of pole numbers on coupling capability of brushless doubly fed machine,” [115] M. F. Hsieh, I. H. Lin, Y. C. Hsu,R. A.McMahon, “Design of brushless doubly-fed machines based on magnetic circuit modeling,” [116] R. A.McMahon, M. E. Mathekga, X. Y. Wang, and M. R. Tatlow, “Design considerations for the brushless doubly-fed (induction) machine,” [117] M. F. Hsieh, Y. H. Chang, D. G. Dorrell, “Design and analysis of brushless doubly-fed reluctance machine for renewable energy applications,” [118] Y. J. Xian, “The considerations for basic sizes of brushless doubly-fed machines,” [119] D. Zhou, R. Spee,G. C. Alexander, “Experimental evaluation of a rotor flux oriented control algorithm for brushless doubly-fed machines,” [120] M. G. Jovanovic, R. E. Betz, J. Yu,E. Levi, “Aspects of vector and scalar control of brushless doubly fed reluctance machines,” in [121] X. Y. Yang,H. Y. Shen, “A simple and practical vector decoupled control of brushless doubly-fed machines,” [122] D. Zhou,R. Spee, “Synchronous frame model and decoupled control development for doubly-fed machines,” in [123] J. Poza, E. Oyarbide, D. Roye,M. Rodriguez, “Unified reference frame d-q model of the brushless doubly fed machine,” [124] A. Ghaffarpour, F. Barati,H. Oraee, “Implementation of direct torque control method on brushless doubly fed induction machines in unbalanced situations,” in [125] W. K. Song,D. G. Dorrell, “Improved direct torque control method of brushless doubly-fed reluctance machines for wind turbine,” in [126] M. G. Jovanovic,R. E. Betz, “Power factor control using brushless doubly fed reluctance machines,” in [127] M. G. Jovanovic,D. G. Dorrell, “Sensorless control of brushless doubly-fed reluctance machines using an angular velocity observer,” in [128] S. M. Li, H. H. He, Y. K. Zhang,Y. Zheng, “A sliding mode variable structure-based direct power control strategy for doubly fed induction generator,” |
| [1] | ZHAN Qiang, LI Wei. Research Progress and Development Trend of Spherical Mobile Robots [J]. Journal of Mechanical Engineering, 2019, 55(9): 1-17. |
| [2] | WANG Guolin, ZHENG Zhou, ZHANG Song, LI Kaiqiang, YANG Jian, ZHOU Haichao. Study on Reducing Wear of Straddle-type Monorail Trains' Running Wheel Tires [J]. Journal of Mechanical Engineering, 2018, 54(6): 78-85. |
| [3] | Peng Han, Ming Cheng, Sul Ademi, Milutin G. Jovanović. Brushless Doubly-Fed Machines: Opportunities and Challenges [J]. Chinese Journal of Electrical Engineering, 2018, 4(2): 1-17. |
| [4] | Yang Donghai,Liu Yang,Wang Yi,Xie Weihua. Research on MPPT Control Algorithm of Photovoltaic System by Binary Ant Colony Algorithm and Fuzzy Neural Network [J]. Journal of Electrical Engineering, 2017, 12(6): 41-46. |
| [5] | ZHANG Longxin, WANG Songtao, LIU Xun, DING Jun, WANG Zhongqi. Effect of Combination of Active and Passive Flow Control Methods on the Flow Structures and Loss of a Highly-loaded Compressor Cascade [J]. Journal of Mechanical Engineering, 2016, 52(22): 161-167. |
| [6] | WANG Lifeng, LIU Fengde, LIU Weina, TIAN Miaolei. Study on Control Methods of Welding Porosity in Laser-arc Hybrid Welding for High Nitrogen Steels [J]. Journal of Mechanical Engineering, 2016, 52(20): 51-59. |
| [7] | LIU Xianli, JI Wei, FAN Mengchao, WANG Changhong. Feature Based Cutting Tool “Shape-Performance-Application” Integrating Design Approach [J]. Journal of Mechanical Engineering, 2016, 52(11): 146-153. |
| [8] | Mingyi Wang, Liyi Li, and Rui Yang. Overview of Thrust Ripple Suppression Technique for Linear Motors [J]. Chinese Journal of Electrical Engineering, 2016, 2(1): 77-84. |
| [9] | SHEN Huiping, YIN Hongbo, LI JU, DENG Jiaming, LIU Anxin. Position and Orientation Characteristic Based Method and Enlightenment for Topology Characteristic Analysis of Typical Parallel Mechanisms and Its Application [J]. Journal of Mechanical Engineering, 2015, 51(13): 101-115. |
| [10] | YANG Tingli, SHEN Huiping, LIU Anxin, DAI Jiansheng. Review of the Formulas for Degrees of Freedom in the Past Ten Years [J]. Journal of Mechanical Engineering, 2015, 51(13): 69-80. |
| [11] | SHU Linsen;CAO Huajun;XU Lei;LI Hao. 3D Characteristic Modeling Method and Application for Remanufactured Impeller of Centrifugal Compressor [J]. , 2014, 50(3): 184-190. |
| [12] | XU Linsen;WEI Xianming;CAO Kai;MEI Tao;LUO Minzhou. Optimization Design and Control Method of Biped Robot Running on Water [J]. , 2014, 50(15): 12-18. |
| [13] | YAO Zhihao;DONG Jianxin;ZHANG Maicang;ZHENG Lei. Effects of Microstructure Characteristics on Fatigue Crack Growth Rate of Powder Metallurgy Superalloy FGH96 [J]. , 2013, 49(20): 158-164. |
| [14] | LI Yuan;LIU Xiaojun;ZHANG Yan;LIU Kun. Frictional Properties of Textured Surfaces under Plane Contact [J]. , 2012, 48(19): 109-115. |
| [15] | LI Nan;WANG Minghui;MA Shugen;LI Bin;WANG Yuechao. Online Stair-climbing Control Based on the Combined Motion Planning of Transformable Tracked Robot [J]. , 2012, 48(1): 47-56. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
