中国电气工程学报（英文） ›› 2021, Vol. 7 ›› Issue (1): 1-26.doi: 10.23919/CJEE.2021.000001
-
收稿日期:2020-12-01修回日期:2021-01-04接受日期:2021-03-02发布日期:2021-04-19
Benefits of High-voltage SiC-based Power Electronics in Medium-voltage Power-distribution Grids*
Fred Wang1,2, Shiqi Ji3,*
- 1. Department of Electrical Engineering and Computer Science, The University of Tennessee, TN 37996, USA;
2. Oak Ridge National Lab, Oak Ridge, TN 37830, USA;
3. Department of Electrical Engineering, Tsinghua University, Beijing 100084, China
-
Received:2020-12-01Revised:2021-01-04Accepted:2021-03-02Published:2021-04-19 -
Contact:* E-mail:sxjisq@gmail.com -
About author:Fred Wang received the B.S. degree from Xi'an Jiaotong University, Xi'an, China, in 1982, and the M.S. and Ph.D. degrees from the University of Southern California, Los Angeles, in 1985 and 1990, respectively, all in electrical engineering.He was a research scientist in the Electric Power Lab, University of Southern California, from 1990 to 1992. He joined the GE Power Systems Engineering Department, Schenectady, NY, as an application engineer in 1992. From 1994 to 2000, he was a senior product development engineer with GE Industrial Systems, Salem, VA. From 2000 to 2001, he was the manager of the Electronic and Photonic Systems Technology Lab, GE Global Research Center, Schenectady, NY, and Shanghai, China. In 2001, he joined the Center for Power Electronics Systems (CPES), Virginia Tech, Blacksburg, as a research associate professor and became an associate professor in 2004. From 2003, he also served as the CPES Technical Director. Since 2009, he has been with The University of Tennessee and Oak Ridge National Lab, Knoxville, TN, as a professor and Condra Chair of Excellence in Power Electronics. He is a founding member of the NSF/DOE Engineering Research Center for Ultra-Wide-Area Resilient Electric Energy Transmission Networks (CURENT) led by the University of Tennessee. His research interests include power electronics and power systems. Dr. Wang is a fellow of the IEEE and a fellow of the US National Academy of Inventors. Shiqi Ji received the B.S. and Ph.D. degrees from Tsinghua University, Beijing, China, in 2010 and 2015, respectively, both in electrical engineering.Since 2015, he joined the Ultra-Wide- Area Resilient Electric Energy Transmission Networks (CURENT), the University of Tennessee, Knoxville, TN, USA, and became a research assistant professor in 2019. Since 2020, he has been with Tsinghua University, Beijing, China, as an assistant professor. He has authored or co-authored more than 50 technical papers. His research interests include semiconductor device modeling, medium-voltage and high-power converter design, high-voltage SiC device characterization and application techniques, and grid-connected converter design. -
Supported by:* DOE through Oak Ridge National Lab and the Power America Program, the Engineering Research Center Program of the National Science Foundation, and the CURENT Industry Partnership Program.
引用本文
. [J]. 中国电气工程学报（英文）, 2021, 7(1): 1-26.
Fred Wang, Shiqi Ji. Benefits of High-voltage SiC-based Power Electronics in Medium-voltage Power-distribution Grids*[J]. Chinese Journal of Electrical Engineering, 2021, 7(1): 1-26.
| [1] M Takeda, S Jochi.Development of adavanced solid state transfer switch using novel hybrid switch devices.in Proc. ASDCOM, 2003: 535-540. [2] J Haefner, B Jacobson.Proactive hybrid HVDC breakers: A key innovation for reliable HVDC grids. [3] A Abramovitz, K M Smedley.Survey of solid-state fault current limiters,IEEE Trans. Power Electron., 2012, 27(6): 2770-2782. [4] N G Hingorani, L Gyugyi.Understanding facts: Concepts and technology of flexible ac transmission systems. New York: IEEE Press, 2000. [5] P S Georgilakis, P G Vernados.Flexible ac transmission system controllers: An evaluation.Materials Science Forum, 2011, 670: 399-406. [6] M Zadehbagheri, N A Azil, A Bagherinasab, et al.Performance evaluation of custom power devices in power distribution networks to power quality improvement: A review.International Journal of Scientific & Engineering Research, 2013, 4(5): 44-49. [7] M Montero, E Cadaval, F Gonzalez.Comparison of control strategies for shunt active power filters in three-phase four-wire systems.IEEE Trans. Power Electron., 2007, 22(1): 229-236. [8] S Babaa, M Armstrong, V Pickert.Overview of maximum power point tracking control methods for PV systems.Journal of Power and Energy Engineering, 2014: 59-72. [9] S B Kjaer, J K Pedersen, F Blaabjerg.A review of single-phase grid-connected inverters for photovoltaic modules. [10] F Blaabjerg, M Liserre, K Ma.Power electronics converters for wind turbine systems.IEEE Energy Conversion Congress and Exposition (ECCE), 2011, 281-290. [11] Z Q Zhu, H Jiabing.Electrical machines and power-electronic systems for high-power wind energy generation applications: Part I-market penetration, current technology and advanced machine systems. [12] M Liserre, R Cardenas, M Molinas, et al.Overview of multi-MW wind turbines and wind parks.IEEE Trans. Ind. Electron., 2011, 58(4): 1081-1095. [13] S Ponnaluri, G Linhofer, J Steinke, et al.Comparison of single and two stage topologies for interface of BESS or fuel cell system using the ABB standard power electronics building blocks.European Conference on Power Electronics and Applications, 2005: 1-9. [14] EPRI. EPRI-DOE handbook of energy Storage for transmission & distribution applications.2003. https:// www.sandia.gov/ess-ssl/publications/ESHB%201001834% 20reduced%20size.pdf. [15] F Blaabjerg, Z Chen, S Kjaer.Power electronics as efficient interface in dispersed power generation systems.IEEE Trans. Power Electron., 2004, 19(5): 1184-1194. [16] J Carrasco, L Franquelo, J Bialasiewicz, et al.Power-electronic systems for the grid integration of renewable energy sources: A survey.IEEE Trans. Ind. Electron., 2006, 53(4): 1002-1016. [17] I Alan, T A Lipo.Induction machine based flywheel energy storage system.IEEE Trans. Aerospace and Electronic systems, 2003, 39(1): 151-163. [18] R H Lasseter.Microgrids.IEEE Power Engineering Society Winter Meeting, 2001: 146-149. [19] S Backhaus, G W Swift.DOE DC microgrid scoping study: Opportunities and challenges.in Proc. ICDCM, 2005: 43-44. [20] R Majunder, A Gosh, G Ledwich.Power management and power flow control with back-to-back converters in a utility connected microgrid.IEEE Trans. Power Systems, 2010, 25(2): 821-834. [21] R Salcedo, A Bokhari, M Diaz-Aguilo, et al.Benefits of a nonsynchronous microgrid on dense-load LV secondary networks.IEEE Trans. Power Del., 2013, 31(3): 1076-1084. [22] R Majumder.A hybrid microgrid with DC connection at back to back converters.IEEE Trans. Smart Grid, 2014, 5(1): 251-259. [23] S Xu, A Q Huang, R Burgos.Review of solid-state transformer technologies and their application in power distribution systems.IEEE Journal of Emerging and Selected Topics in Power Electronics, 2013, 1: 186-198. [24] J Kolar, G Ortiz.Solid-state-transformers: Key components of future traction and smart grid systems. [25] Traction transformation: A power-electronic traction transformer (PETT).ABB Review, 2012, 1: 11-17. [26] R Raju, R Steigerwald, M Dame.High voltage, high frequency silicon carbide power electronic building blocks. GE report.Available: https://www.nist.gov/ system/files/documents/pml/high_megawatt/Approved-Raju-DoE_NIST_HMW_VSD_GE_raju.pdf. [27] D Das, R Kandular, J Munoz, et al.An integrated controllable network transfomer-hybrid active filter system.IEEE Trans. Ind. Appl., 2015, 51(2): 1692-1701. [28] S Zheng, J Wang, F Yang, et al.A DC controller for continuous variable series reactor. [29] J Wang.Design, characterization, modeling and analysis of high voltage silicon carbide power devices. North Carolina: North Carolina State Univ., 2010. [30] Q Zhang, R Callanan, M K Das, et al.SiC power devices for microgrids.IEEE Trans. Power Electron., 2010, 25: 2889-2896. [31] A Hefner, R Sei-Hyung, B Hull, et al.Recent advances in high-voltage, high-frequency silicon-carbide power devices.Industry Applications Conference IAS Annual Meeting, 2006: 330-337. [32] SiC power devices and modules. Rohm Semiconductor Co., Appl. Note 13103EAY01, Jun.2013. Available: https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/applinote/discrete/sic/common/sic_appli-e.pdf. [33] J W Palmour.Future high voltage silicon carbide power devices. Wolfspeed Inc., [34] D Grider, A Agarwal, S H Ryu, et al.Advanced SiC power technology for high megawatt power conditioning. [35] D Grider, M Das, A Agarwal, et al.10 kV/120 A SiC DMOSFET half H-bridge power modules for 1 MVA solid state power substation. Electric Ship Technologies Symposium (ESTS), 2011: 131-134. [36] M K Das, J J Sumakeris, B A Hull, et al.High power, drift-free 4H-SiC PiN diodes.IEEE Lester Eastman Conference on High Performance Devices, 2004: 236-240. [37] R Singh.Ultra-high voltage SiC power devices for reduced power electronics complexity. GeneSiC Semiconductor.Available: https://www.arpa-e.energy.gov/ sites/default/files/documents/files/SolarADEPT_Workshop_NxtGenPwr_Singh.pdf. [38] USCi Custom Products.Available: https://www.ecomal.com/fileadmin/Datenblaetter/USCi/Leaflet/USCi_Leaflet.pdf. [39] J Hostetler, P Alexandrov, X Li, et al.6.5 kV Silicon carbide enhanced mode JFETs for high voltage DC link applications.https://www.sandia.gov/ess-ssl/docs/pr_conferences/2014/Thursday/PosterSession8/12_Hostetler_John_ ENHANCED_MODE_JFETS_Poster.pdf. [40] J W Palmour, L Cheng, V Pala, et al.Silicon carbide power MOSFETs: Breakthrough performance from 900 V up to 15 kV. [41] J B Casady, T McNutt, D Girder, et al. Medium voltage SiC R&D update. Apr.2016. https://www.nist.gov/system/ files/documents/pml/high_megawatt/Wolfspeed-Cree-SiC- Pwr-NIST-wkshp-Apr2016_SHORT.pdf. [42] R Sei-Hyung, K Sumi, B Hull, et al.10 kV, 5 A 4H-SiC power DMOSFET.IEEE International Symposium on Power Semiconductor Devices and IC's (ISPSD), 2006: 1-4. [43] J Wang, T Zhao, J Li, et al.Characterization, modeling, and application of 10-kV SiC MOSFET. IEEE Trans. Electron Devices, 2008, 55: 1798-1806. [44] A Huang.FREEDM system: A vision for the future grid.Power and Energy Society General Meeting, 2010: 1-4. [45] Q Zhang, M Das, J Sumakeris, et al.12-kV p-channel IGBTs with low on-resistance in 4H-SiC. IEEE Trans. Electron Device, 2008, 29: 1027-1029. [46] R Sei-Hyung, C Capell, C Lin, et al.High performance, ultra high voltage 4H-SiC IGBTs.Energy Conversion Congress and Exposition (ECCE), 2012: 3603-3608. [47] Y Yonezawa, T Mizushima, K Takenaka, et al.Low V/f and highly reliable 16 kV ultrahigh voltage SiC flip-type n-channel implantation and epitaxial IGBT. [48] J Hostetler, X Li, P Alexandrov, et al.6.5 kV Silicon Carbide JFETs siwtch module for high density power conversion system. [49] J Bendel, X Li.Using “normally on” JFETs in power system.Bodo’s Power Systems, 2015: 40-43. [50] J Nakashima, A Fukumoto, Y Obiraki, et al.6.5-kV full SiC power module (HV100) with SBD-embedded SiC-MOSFETs.in PCIM Europe, 2018: 441-447. [51] N Soltau.3.3 kV full SiC MOSFETs: Towards high-performance traction inverters.Bodo’s Power Systems, 2018: 22-24. [52] Propulsion systems using 3.3-kV all-SiC devices.https://www.toshiba.co.jp/infrastructure/en/news/20190314.htm. [53] R Takayanagi, K Taniguchi, M Hoya, et al.3.3 kV power module for electric distribution equipment with SiC trench-gate MOSFET.in ICEP, 2019: 83-87. [54] Y Sekino, T Tsuji, T Shiigi, et al.3.3 kV all SiC module with 1st generation trench gate SiC MOSFETs for traction inverters.in PCIM Europe, 2020: 98-103. [55] B Singh, K Al-Haddad, A Chandra.A review of active filters for power quality improvement.IEEE Trans. Ind. Electron., 1999, 46(5): 960-971. [56] J Sun.Impedance based stability criterion for grid-connected inverters.IEEE Trans. Power Electron., 2011, 26(11): 3075-3078. [57] O Mahela, N Gupta, M Khosravy, et al.Comprehensive overview of low voltage ride through methods of grid integrated wind generator.IEEE Access, 2019, 7: 99299-99326. [58] M Aboukheili, M Shahabi, Q Shafiee, et al.Seamless transition of microgrids operation from grid-connected to islanded mode.IEEE Trans. Smart Grid, 2020, 11(3): 2106-2114. [59] F Qiu, J Wang, C Chen, et al.Optimal black start resource allocation.IEEE Trans. Power Systems, 2016, 31(3): 2493-2494. [60] S Ji, S Zheng, F Wang, et al.Temperature-dependent characterization, modeling and switching speed limitation analysis of third generation 10 kV SiC MOSFET.IEEE Trans. Power Electron., 2018, 33(5): 4317-4327. [61] S Ji, M Laitinen, X Huang, et al.Short circuit characterization and protection of 10 kV SiC MOSFET.IEEE Trans. Power Electron., 2019, 34(2): 1755-1764. [62] L Zhang, S Ji, S Gu, et al.Design considerations for high- voltage-insulated gate drive power supply for 10-kV SiC MOSFET applied in medium-voltage converter. [63] J Palmer, S Ji, X Huang, et al.Improving voltage sensor noise immunity in a high voltage and high dv/dt environment. [64] S Ji, X Huang, L Zhang, et al.Medium voltage (13.8 kV) transformer-less grid-connected DC/AC converter design and demonstration using 10 kV SiC MOSFETs.IEEE Energy Conversion Congress and Exposition (ECCE), 2019: 1953-1959. [65] S Ji, L Zhang, X Huang, et al.A novel voltage balancing control with dv/dt reduction for 10-kV SiC MOSFET-based medium voltage modular multilevel converter.IEEE Trans. Power Electron., 2020, 35(11): 12533-12543. [66] D Li, S Ji, X Huang, et al.Controller development of an asynchronous microgrid power conditioning system (PCS) converter considering grid requirements. [67] J Palmer, S Ji, X Huang, et al.Testing and validation of 10 kV SiC MOSFET based 35 kVA MMC phase-leg for medium voltage (13.8 kV) grid.IEEE Energy Conversion Congress and Exposition (ECCE), 2019: 2001-2006. |
| No related articles found! |
| 阅读次数 | ||||||
|
全文 |
|
|||||
|
摘要 |
|
|||||