A Critical Topology Review of Power Electronic Transformers: In View of Efficiency

中国电气工程学报（英文） ›› 2018, Vol. 4 ›› Issue (2): 90-95.

出版日期:2018-06-25 发布日期:2019-10-31

A Critical Topology Review of Power Electronic Transformers: In View of Efficiency

Guidong Zhang¹, Jie Chen¹, Bo Zhang², Yun Zhang^1,*

1. School of Automation, Guangdong University of Technology, Guangzhou 510006, China;
2. South China University of Technology, Guangzhou 510006, China

Online:2018-06-25 Published:2019-10-31
Contact: * , Email: yun@gdut.edu.cn.
About author:Guidong Zhang (M'13) was born in Guangdong, China, in 1986. He received the B.Sc. degree and two Ph.D. degrees from Xi'an University of Technology, South China University of Technology. His research interests include power electronics topology and their applications. Jie Chen was born in Hunan, China, in 1992. He has been working toward the B.Sc. degree at the School of Automation, Guangdong University of Technology, Guangzhou, China, since September 2017. His current research interests include power electronics topology and their applications. Bo Zhang (M'03-SM'15) was born in Shanghai, China, in 1962. He received the B.S. degree in electrical engineering from Zhejiang University, Hanzhou, China, in 1982, the M.S. degree in power electronics from Southwest Jiaotong University, Chengdu, China, in 1988, and the Ph.D. degree in power electronics from Nanjing University of Aeronautics and Astronautics, Nanjing, China, in 1994. He is currently a Professor in the School of Electric Power, South China University of Technology, Guangzhou, China. He has authored or coauthored more than 380 papers and 80 patents. His current research interests include nonlinear analysis and control of power supplies and AC drives. Yun Zhang received the B.Sc. and M.Sc. degrees in automatic engineering from Hunan University, Changsha, China, in 1982 and 1986, respectively, and the Ph.D. degree in automatic engineering from the South China University of Technology, Guangzhou, China, in 1998. He is currently a Professor with the School of Automation, Guangdong University of Technology, Guangzhou. His current research interests include intelligent control systems, network systems, and signal processing.
Supported by:
Supported by the Natural Science Foundation of Guangdong Province (2017A030310243).

摘要/Abstract

Abstract: Design of power electronic transformers is a hot research topic and its efficiency improvement is a critical problem all over the world. It is also the largest barrier hindering the application of power electronic transformers in industry. In this paper, the state of power electronic transformers is fully presented in terms of efficiency improvements. It is followed by the efficiency modeling of several typical topologies, and their detailed analysis and comparisons. Then, the corresponding industrial application scope of these topologies is presented, providing theoretical guidance for their industrial applications.

Key words: Power electronic transformer, topology, efficiency, modeling

. [J]. 中国电气工程学报（英文）, 2018, 4(2): 90-95.

Guidong Zhang, Jie Chen, Bo Zhang, Yun Zhang. A Critical Topology Review of Power Electronic Transformers: In View of Efficiency[J]. Chinese Journal of Electrical Engineering, 2018, 4(2): 90-95.

参考文献

[1] S. Sinha,S. Chandel, “Review of recent trends in optimization echniques for solar photovoltaic-wind based hybrid energy systems,” Renewable and Sustainable Energy Reviews, vol. 50, pp. 755-769, 2015.
[2] R. Rajesh,M. C. Mabel, “A comprehensive review of photovoltaic systems,” Renewable and sustainable energy reviews, vol. 51, pp. 231-248, 2015.
[3] B. Xiao, L. Hang, J. Mei,C. Riley, “Modular cascaded h-bridge multilevel pv inverter with distributed mppt for grid-connected applications,” IEEE Transactions on Industry Applications, vol. 51, no. 2, pp. 1722-1731, 2014.
[4] M. Amirabadi, A. Balakrishnan, H. A. Toliyat,W. C. Alexander, “High-frequency AC-link PV inverter,” IEEE Transactions on Industrial Electronics, vol. 61, no. 1, pp. 281-291, 2013.
[5] X. She, X. Yu, F. Wang,A. Q. Huang, “Design and demonstration of a 3.6kVc120V/10kVA solid-state transformer for smart grid application,” IEEE Transactions on Power Electronics, vol. 29, no. 8, pp. 3982-3996, 2014.
[6] X. Yu, X. She, X. Zhou,A. Q. Huang, “Power management for DC microgrid enabled by solid-state transformer,” IEEE Transactions on Smart Grid, vol. 5, no. 2, pp. 954-965, 2014.
[7] D. Wang, J. Tian, C. Mao, J. Lu, Y. Duan, J. Qiu,H. Cai, “A 10kV/400V 500kVA electronic power transformer,” IEEE Transactions on Industrial Electronics, vol. PP, no. 99, pp. 1-1, 2016.
[8] E. R. Ronan, S. D. Sudhoff, S. F. Glover,D. L. Galloway, “A power electronic-based distribution transformer,” IEEE Power Engineering Review, vol. 22, no. 3, pp. 61-61, 2007.
[9] D. Wang, C. Mao,J. Lu, “Modelling of electronic power transformer and its application to power system,” IET Generation, Transmission & Distribution let, vol. 1, no. 6, pp. 887-895, 2007.
[10] C. Gu, Z. Zheng, L. Xu, K. Wang,Y. Li, “Modeling and control of a multiport power electronic transformer(PET) for electric traction applications,” IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 915-927, 2015.
[11] E. R. Ronan, S. D. Sudhoff, S. F. Glover,D. L. Galloway, “A power electronic-based distribution transformer,”IEEE Transactions on Power Delivery, vol.17, no.2, pp.537-543, 2002.
[12] X. She, A. Q. Huang,R. Burgos, “Review of solid-state transformer technologies and their application in power distribution systems,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 1, no. 3, pp. 186-198, 2013.
[13] S. H. Hosseini, M. Sabahi,A. Y. Goharrizi, “Multi-function zero-voltage and zero-current switching phase shift modulation converter using a cycloconverter with bi-directional switches,” IET Power Electronics, vol. 1, no. 2, pp. 275-286, 2008.
[14] M. Sabahi, S. H. Hosseini, M. B. B.Sharifian, A. Y. Goharrizi, and G. B. Gharehpetian, “A three-phase dimmable lighting system using a bidirectional power electronic transformer,” IEEE Transactions on Power Electronics, vol. 24, no. 3, pp. 830-837, 2009.
[15] M. Kang, P. N. Enjeti,I. J. Pitel, “Analysis and design of electronic transformers for electric power distribution system,” IEEE Transactions on Power Electronics, vol. 14, no. 6, pp. 1133-1141, 2002.
[16] M. D. Manjrekar, R. Kieferndorf,G. Venkataramanan, “Power electronic transformers for utility applications,” Conference Record of the Industry Applications Conference, vol.4, pp. 2496-2502, 2000.
[17] T. Zhao, L. Yang, J. Wang,A. Q. Huang, “270kVA solid state transformer based on 10kV SiC power devices,” inIEEE Electric Ship Technologies Symposium, ESTS ’07, pp. 145-149, 2007.
[18] Y. Du, S. Baek, S. Bhattacharya, and A. Q. Huang, “Highvoltage high-frequency transformer design for a 7.2kV to 120V/240V 20kVA solid state transformer,” IECON 2010 - Conference on IEEE Industrial Electronics Society, pp. 493-498, 2010.
[19] T. Besselmann, A. Mester,D. Dujic, “Power electronic traction transformer: Efficiency improvements under light-load conditions,” IEEE Transactions on Power Electronics, vol. 29, no. 8, pp. 3971-3981, 2014.
[20] H. Fan,H. Li, “High-frequency transformer isolated bidirectional dc-dc converter modules with high efficiency over wide load range for 20kVA solid-state transformer,” IEEE Transactions on Power Electronics, vol. 26, no. 12, pp. 3599-3608, 2011.
[21] M. Sabahi, S. H. Hosseini, M. B. Sharifian,A. Y. Goharrizi, “Zero-voltage switching bi-directional power electronic transformer,” IET Power Electronics, vol.3, no.5, pp. 818-828, 2010.
[22] H. Chen,D. Divan, “Design of a 10kVA soft-switching solid state transformer(s4t),” IEEE Transactions on Power Electronics, vol. PP, no. 99, pp. 1-1, 2017.
[23] M. R. Mohammadi,H. Farzanehfard, “Analysis of diode reverse recovery effect on the improvement of soft-switching range in zero-voltage-transition bidirectional converters,” IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1471-1479, 2015.
[24] P. W. Wheeler, J. C. Clare, L. Empringham,M. Bland, “Matrix converters,”IEEE Industry Applications Magazine, vol. 10, no.1, pp.59-65, 2002.
[25] S. Falcones, X. Mao,R. Ayyanar, “Topology comparison for solid state transformer implementation,” inPower and Energy Society General Meeting, pp. 1-8, 2010.

A Critical Topology Review of Power Electronic Transformers: In View of Efficiency

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价