New Technical Trends on Adjustable Speed AC Motor Drives

中国电气工程学报（英文） ›› 2017, Vol. 3 ›› Issue (1): 1-9.

• • 下一篇

发布日期:2019-11-01

New Technical Trends on Adjustable Speed AC Motor Drives

Kouki Matsuse^1,*, Daiki Matsuhashi²

1. Meiji University, Tokyo, Japan;
2. Meidensha Corporation, Tokyo, Japan

Published:2019-11-01
Contact: E-mail: matsuse@meiji.ac.jp.
About author:Kouki Matsuse received the Ph.D. degrees in electrical engineering from Meiji University, Tokyo, Japan, in 1971. In 1971, he joined the faculty of Meiji University as a Lecturer of Electrical Engineering. Since 1979, he has been a Professor in the Department of Electrical Engineering. Since 2014, he is an emeritus professor of Meiji University. Since 1998, he has been invited to be a Guest Professor in the Department of Electrical Engineering, Tsinghua University, China. He has published 100 transaction and Journal papers, 227 referred international conference full-papers, and is the holder of 17 patents. His research interests are power electronics, microprocessorbased controllers for static power converters and drives, sensorless control of AC motor drives. Dr. Matsuse is a Life Fellow IEEE, Fellow NAI, USA, Fellow IEEJ, and received the Outstanding Achievement Awards of the IEEE IAS and the IEEJ in 2000 and 2003.Daiki Matsuhashi received the B. E. degree and the M. E. degree in electrical engineering from Tokyo Metropolitan Institute of Technology in 1992 and 1994 respectively. Since 1994, he has been with Meidensha Corporation. He is currently a Manager in Research Section 2, Power Electronics Research Development, Basic & Core Technology Research Laboratories, Research and Development Group of Meidensha Corporation. His research interests are electromagnetic field analysis, design and development of motor and generator. He is a member of Institute of Electrical Engineering of Japan (IEEJ).

摘要/Abstract

Abstract: Adjustable speed AC Motor drives have been used extensively in modern industry and transportation which calls for electrical and mechanical energy conversion with wide output power range applications. Because of its modularity and scalability, the drive system can be extended to many different application areas. More recently, adjustable speed AC motor drive applications are spreading not only in industry applications, but also sky and the marine. In this paper, after summarizing the history of adjustable speed AC motor drives and applications, the main issues of AC drive technologies are reviewed and investigated in the paper. Technical issues of adjustable speed AC motor drives including its standardization are surveyed and analyzed for more advancement. Finally, the paper provides the latest technical trends on adjustable speed AC motor drives technologies, and discusses the development of high speed high power PM motor.

Key words: Electric machine, drive technology, adjustable speed motor drive, AC machine, drive system, Industry applications, transportation application, high speed PM motor

. [J]. 中国电气工程学报（英文）, 2017, 3(1): 1-9.

Kouki Matsuse, Daiki Matsuhashi. New Technical Trends on Adjustable Speed AC Motor Drives[J]. Chinese Journal of Electrical Engineering, 2017, 3(1): 1-9.

参考文献

[1] K. Matsuse, S. Saito,S. Tadakuma, “History of motor drive technologies in Japan-part 1,” IEEE Ind. Appl. Mag., vol. 19, no. 6, pp. 10-17, Nov./Dec. 2013.
[2] B. K. Bose, “Power electronics and motor drives-recent progress and perspective,” IEEE Trans. Ind. Electron., vol.56, no.1, pp.1-9, Feb.2009.
[3] B. K. Bose, “The past, present, and future of power electronics,” IEEE Ind. Electron. Society Magazine, vol.3, no.1, pp.7-14, Jun. 2009.
[4] B. K. Bose, “Power electronics—historical perspective and my experience,” IEEE Ind., App., Soc. Mag., vol.20, no.2, pp.7-13, Mar./April, 2014.
[5] B. D. Bedford,R. G. Hoft, Principles of Inverter Circuit. New York: Wiley, 1964.(Japanese translation version), K. Imai, M. Jinzenji, et al., Inverter Circuit. Corona publishing Co. Ltd., 1968.
[6] M. Yano,R. Uchida, “History of power electronics in Japan(in Japanese),” Trans. IEE Japan, vol.121-A, no.1, pp.2-10, 2001.
[7] A. Nabae, “Historical view of power electronics(in Japanese),” Trans. Power Electronics Kenkyuukai, vol.16, no. , pp.1-9, Feb. 1991.
[8] K. Kamiyama, S. Sugiyama, D. Morinaga,M. Hombu, “Application of power electronics to motor drives,”(in Japanese), Hitachi-Hyoron, vol.70, no.10, pp.1049-1055, 1988.
[9] T. Sawa and T. Kume, “Motor drive technology: history and vision for the future,” in Proc. 35th IEEE Power Electronics Specialists Conf., Aachen, Germany, pp.2-9, 2004.
[10] K. Matsuse, S. Saito,S. Tadakuma, “History of motor drivetechnologies in Japan-part 2,” IEEE Ind. Appl. Mag., vol.20 no.1, pp.8-15, Jan./Feb.2014.
[11] S. Saito, H. Konishi,A. Kaga, “Growth patterns and tasks of power electronics apparatuses(in Japanese),” IEE Japan Trans., vol.124-A, no.8, pp.653-660, 2004.
[12] M. Yano, S. Abe,E. Ohno,“Historical review of power electronics for motor drives in Japan,” in Proc. 36th IEEE Power Elec. Specialists Conf.(IPEC-Niigata), Niigata, pp.81-89, Apr.2005.
[13] S. Abe,E. Watanabe, “History of elevators and related research(in Japanese),” IEE Japan Trans.,vol.124-D, no.8, pp.679-687, 2004.
[14] N. Mitsui, “Historical development of rope type elevator technology(in Japanese),” National Museum of Nature and Science, Tokyo, Survey Reports on the Systemization of Technologies, No.9, pp.59-118, Mar. 2007.
[15] K. Rajashekara, “History of electric vehicles in general motors,” IEEE Trans. Ind. Appl., vol.IA-30, no.4, pp.897-904, Jul./Aug. 1994.
[16] H. Kehrmann, W. Lienau,R. Nill, “Der vierquadrantensteller-ein pulsstromrichter zur einspeisung von triebfahrzeugen mit drehstromantrieb aus dem einphasen-bahnnetz,” IFAC Symp. -Duesseldorf, vol.2, pp.357-372, Oct. 1974.
[17] Y. Oda, M. Karppinen,T. Hietto,“Space and energy saving elevator(in Japanese),” The Conf. of Japan society of Mechanical Engineers on Elevator, Escalator and Amusement Rides, Tokyo, No.97-76, pp.25-28, Dec. 1997.
[18] IEEJ,Current Situations and Future Issues of Adjustable- Speed AC Drives(in Japanese). Technical Report, No.1326, 64p, Dec. 2014.
[19] S. Kim, J. I. Ha,S. K. Sul, “PWM switching frequency signal injection sensorless method in IPMSM,” IEEE Trans. on I.A., vol.48, no.5, pp.1576-1587, 2012.
[20] R. Leidhold, “Position sensorless control of PM synchronous motors based on zero-sequence carrier injection,” IEEE Trans. on I.E, vol.58, no.12, pp.5371-5379, 2011.
[21] J. S. Lee, C. H. Choi, J. K. Seok,R. D. Lorentz, “Deadbeatdirect torque ad flux control of interior permanent magnet synchronous machines with discrete time stator current and stator flux linkage observer,” IEEE Trans. on I.A., vol.47, no. 4, pp.1749-1757, 2011.
[22] K. Akatsu,R. D. Lorentz, “Comparing coupled analysis with experimental results for an interior PM machines,” IEEE Trans. on I.A., vol.45, no.1, pp.178-185, 2009.
[23] P. B. Reddy, T. M. Jahns,T. P. Bohn, “Modeling and analysis of proximity losses in high-speed surface permanent magnet machines with concentrated winding,”IEEE ECCE, pp.996-1003, 2010.
[24] P. Mellor, R. Wrobel, D. Salt,A. Griffo, “Experimental and analytical determination of proximity losses in a highspeed PM machine,”IEEE ECCE2013, pp.3504-3511, 2013.
[25] P. B. Reddy,T. M. Jahns, “Scalability investigation of proximity losses in fractional-slot concentrated winding surface PM Machines during high-speed operation,”IEEE ECCE, pp.1670-1675, 2011.
[26] S. Yamamoto, H. Hirahara, A. Tanaka, T. Ara,K. Matsuse, “Maximum efficiency drives of synchronous reluctance motors with on-line stator resistance estimator”IEEE ECCE, pp.3140-3145, 2013.
[27] M. Hirst, A. McLoughlin, P. J. Norman,S. J. Galloway, “Demonstrating the more electric engine: a step towards the power optimised aircraft,” IET Electr. Power Appl., vol. 5, no.1, pp. 3-13, 2011.
[28] K. Rajashekara, “Converging technologies for electric/hybrid vehicles and more electric aircraft systems”, SAE Power Systems Conference, Paper no.2010-01-1757, Fort Worth, TX, November 2-4, 2010.
[29] T. Takamasa, “Development of plug-in electric boat “RAICHO-I (in Japanese),” Journal of the JIME, vol.47, no.1, pp.9-16, 2012.
[30] L. Holger, “Future standardization landscape-Facing future trends in TC22 - a discussion,” IEC 22 Plenary Meeting, Darmstadt Germany, Sept. 27, 2013.
[31] Meidensha Catalogue, Ultra-high speed PM & medium voltage drive. Meidensha Corporation, 2016.
[32] T. Fukao,A. Chiba, “Super high speed drives-introduction( in Japanese),” Proceeding of National Convention of IEEJ, S.21.1-4, 1998.
[33] M. Rahman, A. Chiba,T. Fukao, “Super high speed electrical machines-summary,” IEEE Power Engineering Society General Meeting, vol.2, pp.1272-1275, 2004.
[34] B. Sarlioglu,T. Wu, “Design and analysis of electrical machines including high-speed types,”IEEE IECON Tutorial, pp.176, 2014.
[35] B. Sarlioglu, T. Jahns,D. Ionel, “Design and manufacturing of PM electric machines,” IEEE ECCE, Tutorial, 196p, 2015.
[36] J. Luomi, C. Zwyssig,A. L. J. W. Kolar, “Efficiency optimization of a 100W 500000r/min permanent magnet machine including air-friction losses,” IEEE Trans. on I.A, vol.45, no.4, pp.1368-1377, 2009.
[37] H. Noguchi, Y. Takada, Y. Yamashita, Y. Komatsu,S. Ibaragi, “200000r/min, 2kW PM motor drive system for turbo charger,” IEEJ Trans, vol.125-D, no.9, pp.854-861, 2005.
[38] C. J. Bateman, B. C. Mecrow, P. P. Acarnley, A. C. Clothier,N. D. Tuftnell, “Sensorless operation of an ultra-highspeed switched reluctance machine,” IEEE Trans. I.A., vol.46, no.6, pp.2329-2337, 2010.
[39] A. Binder,G. Munteanu, “Bearingless PM motor levitation systems,” Proceeding of ICEMS, Special Lecture, SL-4, @Sapporo, CDROM, 2001.
[40] T. Okitsu, S. Uchiyama, K. Matsuso,D. Matsuhashi, “Performance evaluation of high speed PM motor -250kW-20, 000 r/min(in Japanese),” Meidenn-jiho, vol.352, no.3, pp.30-33, 2016.
[41] S. Uchiyama, K. Matsuso, H. Ohnishi, T. Okitsu,D. Matsuhashi, “Characteristic evaluation of 250kW-20000r/min High Speed PM motor(in Japanese),” inProc. IEEJ National Convention, pp.35-36, 2016.
[42] D. Matsusuhashi,K. Matsuse, “High power high speed motor drives for industry applications,” IEEE PEDES, Plenary speech, India, Dec. 16, 2016.

New Technical Trends on Adjustable Speed AC Motor Drives

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价