Study on the Peripheral Magnetic Leakage and Shielding Measures of Surface-mounted Permanent Magnet Motor*

doi:10.23919/CJEE.2022.000006

Chinese Journal of Electrical Engineering ›› 2022, Vol. 8 ›› Issue (1): 63-69.doi: 10.23919/CJEE.2022.000006

• Regular Papers • Previous Articles Next Articles

扫码分享

Study on the Peripheral Magnetic Leakage and Shielding Measures of Surface-mounted Permanent Magnet Motor^*

Fan Rao, Xusheng Wu, Wei Gao^*, Da Li

College of Electrical Engineering, Naval University of Engineering, Wuhan 430033, China

Received:2021-04-21 Revised:2021-06-20 Accepted:2021-10-24 Online:2022-03-25 Published:2022-04-08
Contact: *E-mail: depkin@163.com
Supported by:
*Youth Program of the National Natural Science Foundation of China (51970970).

Abstract

Abstract: Permanent magnet (PM) motors are widely used in our daily lives. Taking a surface-mounted PM motor as an example, a magnetic circuit model considering the peripheral magnetic flux leakage is established. Maxwell software is used to simulate different loads and thicknesses and the materials of the shielding layers. The magnetic flux leakage around the motor has a sinusoidal distribution in the space. The value of the magnetic flux leakage is inversely proportional to the power of P+1 from the surface of the core. The thicker the shielding layer, the smaller the magnetic leakage. The greater the relative permeability of the shielding layer, the better the shielding effect. The results provide ideas and recommendations for the magnetic flux leakage analysis and the design of non-magnetic or low magnetic motors.

Key words: Surface-mounted permanent magnet motor, Maxwell software, peripheral magnetic leakage

Fan Rao, Xusheng Wu, Wei Gao, Da Li. Study on the Peripheral Magnetic Leakage and Shielding Measures of Surface-mounted Permanent Magnet Motor^*[J]. Chinese Journal of Electrical Engineering, 2022, 8(1): 63-69.

References

[1] R Y Tang.Theory and design of modern permanent magnet motor. Beijing: China Machine Press, 2016.
[2] L F Geng, Y Z Wu.Development trend of modern permanent magnet motor.Journal of Shenyang University of Technology, 1995(1): 25-28.
[3] A Higuchi, S Hirosawa.Sintered Nd-Fe-B permanent magnets.IEEE Transactions on Magnetics, 1989, 25(5): 3555-3560.
[4] B Li.Analysis and reducing techniques review of torque ripple for permanent magnet brushless motor.Electric Machines & Control Application, 2011, 38(4): 6-12.
[5] E A Lomonova, E Kazmin, Y Tang, et al.In-wheel PM motor: Compromise between high power density and extended speed capability.Compel International Journal for Computation & Mathematics in Electrical & Electronic Engineering, 2009, 30(1): 98-116.
[6] Y F Wang.Research on magnetic interference compensation technology for airborne geomagnetic measurement. Wuhan: Huazhong University of Science and Technology, 2012.
[7] X J Liu.Research on magnetic interference compensation algorithm based on underwater robot. Harbin: Harbin Institute of Technology, 2018.
[8] T Lubin, S Mezani, A Rezzoug.Exact analytical method for magnetic field computation in the air gap of cylindrical electrical machines considering slotting effects.IEEE Transactions on Magnetics, 2010, 46(4): 1092-1099.
[9] R Romary, D Roger, J F Brudny.Analytical computation of an AC machine external magnetic field.European Physical Journal Applied Physics, 2009, 47(3): 1-6.
[10] R Romary, S Jelassi, F Brudny.Stator-interlaminar-fault detection using an external-flux-density sensor.IEEE Transactions on Industrial Electronics, 2010, 57(1): 237-243.
[11] J K Lee.A study on analysis of synchronous reluctance motor considering axial flux leakage through end plate.IEEE Transactions on Magnetics, 2019: 1-4.
[12] Y Feng, F Li, S Huang, et al.Variable-flux outer-rotor permanent magnet synchronous motor for in-wheel direct-drive applications.Chinese Journal of Electrical Engineering, 2018, 4(1): 28-35.
[13] X T Zhang, P Fu, Y Ma, et al.No-load iron loss model for a fractional-slot surface-mounted permanent magnet motor based on magnetic field analytical calculation.Chinese Journal of Electrical Engineering, 2018, 4(4): 71-79.
[14] J W Jung, M S Lim, J P Hong, et al.Characteristics analysis of SPMSM using 2-D finite-element analysis considering axial leakage flux.IEEE Transactions on Magnetics, 2017, 54(3): 1-4.
[15] M Dai, A Keyhani, T Sebastian.Torque ripple analysis of a PM brushless DC motor using finite element method.IEEE Transactions on Energy Conversion, 2004, 19(1): 40-45.
[16] Y Kawase, T Yamaguchi.Analysis of cogging torque of permanent magnet motor by 3-D finite element method.IEEE Trans. Magn., 1995, 31(3): 2044-2047.
[17] W Li, B W Song, Y L Hu.Numerical analysis of magnetic leakage field of permanent magnet DC motor for underwater vehicle.Machinery & Electronics, 2011(3): 33-35, 38.
[18] F P Li, Y L Hu, J B Dong.Simulation analysis of magnetic flux leakage of permanent magnet DC motor based on magnet.Small & Special Machines, 2010, 38(4): 27-29.
[19] W Li, B W Song, Y L Hu.Magnetic flux leakage simulation of permanent magnet DC motor.Small & Special Machines, 2010, 38(9): 16-18.
[20] J M Li, Y L Hu.Analysis of the influence of shield on the magnetic field of permanent magnet DC motor.Small & Special Machines, 2011, 38(8): 19-22.
[21] C Y Sun, M J Liu, Y L Luo, et al.Shaft leakage analysis of different rotor structures of tangential permanent magnet synchronous motor.Small & Special Machines, 2010(2): 27-29.
[22] Naval Sea Systems Command, Department of the Navy. MIL DTL 17060-2016 motors, alternating current, integral-horsepower, shipboard use. Washington: Military and Government Specs & Standards, 2016.
[23] S B Liao.Ferromagnetism. Beijing: Science Press, 1988.
[24] X H Wang.Permanent magnet motor. Beijing: China Electric Power Press, 2007.
[25] A E Fitzgerald, C K Jr, S D Umans.Electric machinery. NewYork: McGraw-Hill, 2005.

Study on the Peripheral Magnetic Leakage and Shielding Measures of Surface-mounted Permanent Magnet Motor^*

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments