中国电气工程学报(英文) ›› 2018, Vol. 4 ›› Issue (2): 18-27.
出版日期:
2018-06-25
发布日期:
2019-10-31
Jianwei Zhang1,*, Li Li1, David G. Dorrell2
Online:
2018-06-25
Published:
2019-10-31
Contact:
*, Email: Jianwei.Zhang@uts.edu.au.
About author:
Jianwei Zhang (S’15) received his bachelor degree in electrical engineering from the Northwest A&F University, Yangling, Shanxi, China, in 2014. Since then, he has been working towards his Ph.D. degree in electrical engineering at the University of Technology Sydney (UTS), Sydney, New South Wales, Australia. From 2015, he has been working as a Casual Academic at the Faculty of Engineering and IT, UTS. His research interests include control of power electronic converters, matrix converters, microgrids and AC motor drives. Li Li (M’12) was born in Henan, China. He received his B.S. degree from Huazhong University of Science and Technology in 1996, M.S. degree from Tsinghua University in 1999, and Ph.D. degree from University of California, Los Angeles in 2005. From 2005 to 2007, he was a research associate at the University of New South Wales at the Australian Defence Force Academy (UNSW@ADFA). From 2007 to 2011, he was a researcher at the National ICT Australia, Victoria Research Laboratory, Department of Electrical and Electronic Engineering, The University of Melbourne. He joined UTS in 2011 and currently he is an Associate Professor. Dr. Li held several visiting positions at Beijing Institute of Technology, Tsinghua University and UNSW@ADFA. His research interests are control theory and power system control. His interests are control theory and power system control. David G. Dorrell (M’95-SM’08) is a native of St. Helens, U.K. He received the B.Eng. (Hons.) degree in electrical and electronic engineering from the University of Leeds, Leeds, U.K., in 1988; the M.Sc. degree in power electronics engineering from the University of Bradford, Bradford, U.K., in 1989; and the Ph.D. degree in engineering from the University of Cambridge, Cambridge, U.K., in 1993. Since 2015, he has been Professor of Electrical Machines with the University of KwaZulu-Natal, Durban, South Africa. He is also the Director of the EPPEI Specialization Centre of HVDC and FACTS, UKZN. He has held lecturing positions at Robert Gordon University, Aberdeen, U.K., and the University of Reading, Reading, U.K. He was a Senior Lecturer at the University of Glasgow, Glasgow, U.K., for several years. In 2008, he took up a post as a Senior Lecturer at the University of Technology Sydney, Ultimo, NSW, Australia, and he was promoted to an Associate Professor in 2009. He is also an Adjunct Associate Professor with National Cheng Kung University, Tainan, Taiwan. His research interests include the design and analysis of various electrical machines, and also renewable energy systems. Dr. Dorrell is a Chartered Engineer in the U.K. and also a fellow of the Institution of Engineering and Technology.
Supported by:
. [J]. 中国电气工程学报(英文), 2018, 4(2): 18-27.
Jianwei Zhang, Li Li, David G. Dorrell. Control and Applications of Direct Matrix Converters: A Review[J]. Chinese Journal of Electrical Engineering, 2018, 4(2): 18-27.
[1] M. Y. Lee, P. Wheeler,C. Klumpner, "Space-vector modulated multilevel matrix converter," [2] L. Gyugi,B. Pelly, [3] A. Daniels,and D. Slattery, “New power convertor technique employing power transistors,” [4] M. Venturini,A. Alesina.“The generalized transformer: a new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor,” [5] M. Venturini, “A new sine wave in sine wave out, conversion technique which eliminates reactive elements,” [6] A. Alesina,M. G. B.Venturini, "Analysis and design of optimum-amplitude nine-switch direct AC-AC converters," [7] L. Huber,D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction," [8] L. Empringham, J. W. Kolar, J. Rodríguez, P. W. Wheeler,J. C. Clare, "Technological issues and Ind. application of matrix converters: a review," [9] P. Wheeler, J. Rodríguez, Jon C. Clare, Lee Empringham, and Alejandro Weinstein, “Matrix converters: a technology review," [10] J. Itoh, A. Odaka,I. Sato, "High efficiency power conversion using a matrix converter," [11] A. Jahangiri,A. Radan, "Indirect matrix converter with unity voltage transfer ratio for AC to AC power conversion," [12] Z. Luca, [13] J. Chang, T. Sun,A. Wang, "Highly compact AC-AC converter achieving a high voltage transfer ratio," [14] J. Oyama, T. Higuchi, E. Yamada, T. Koga,T. Lipo, "New control strategy for matrix converter," [15] J. Zhang, L. Li,D. G. Dorrell, "D-q coupling suppressed pid controller for the transmission line power flow control using a matrix converter," [16] J. Zhang, D. G. Dorrell,L. Li, "Applications of the direct space vector modulation controlled matrix converter as the unified power flow controller," [17] J. Rodriguez, M. Rivera, J. W. Kolar,P. W. Wheeler, "A review of control and modulation methods for matrix converters," [18] H. Karaca,R. Akkaya, "Control of Venturini method based matrix converter in input voltage variations," [19] J. Zhang, H. Yang, T. Wang, L. Li,D. G. Dorrell, "Fieldoriented control based on hysteresis band current controller for a permanent magnet synchronous motor driven by a direct matrix converter," [20] J. Zhang, L. Li, L. Zhang,D. G. Dorrell, "Hysteresis band current controller based field-oriented control for an induction motor driven by a direct matrix converter," [21] R. Vargas, U. Ammann, J. Rodríguez,J. Pontt, "Predictive strategy to control common-mode voltage in loads fed by matrix converters," [22] J. Monteiro, J. F. Silva, S. F. Pinto,J. Palma, "Linear and sliding-mode control design for matrix converter-based unified power flow controllers," [23] D. Casadei, G. Serra,A. Tani, "The use of matrix converters in direct torque control of induction machines," [24] H. Karaca, R. Akkaya,H. Dogan, "A novel compensation method based on fuzzy logic control for matrix converter under distorted input voltage conditions," [25] P. Q. Dzung, "A new artificial neural network-Direct torque control for matrix converter fed three-phase induction motor," [26] J. Zhang, L. Li, D. G. Dorrell,Y. Guo, "A PI controller with current feedforward to improve the steady-state error performance for the current controlled direct matrix converter," [27] J. Zhang, L. Li, D. Dorrell,Y. Guo, "SVM based proportional resonant current controller with selective harmonics compensation for matrix converter systems," [28] D. Casadei, Domenico, G. Serra, A. Tani, and L. Zarri, "Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state," [29] Y. Yoon,S. K. Sul, "Carrier-based modulation technique for matrix converter," [30] P. C. Loh, R. Rong, F. Blaabjerg,P. Wang, “Digital carrier modulation and sampling issues of matrix converters,” [31] F. Gao,M. R. Iravani, "Dynamic model of a space vector modulated matrix converter," [32] C. Klumpner, M. Lee,P. Wheeler, "A new three-level sparse indirect matrix converter," [33] T. Friedli, J. W. Kolar, J. Rodriguez,P. W. Wheeler, "Comparative evaluation of three-phase AC-AC matrix converter and voltage DC-link back-to-back converter systems," [34] H. J. Cha,P. N. Enjeti, "An approach to reduce common-mode voltage in matrix converter," [35] P. Nielsen, F. Blaabjerg, and J. K. Pedersen, "Space vector modulated matrix converter with minimized number of switchings and a feedforward compensation of input voltage unbalance," [36] A. Tripathi,P. C. Sen, "Comparative analysis of fixed and sinusoidal band hysteresis current controllers for voltage source inverters," [38] K. B. Lee,F. Blaabjerg, "Sensorless DTC-SVM for induction motor driven by a matrix converter using a parameter estimation strategy," [39] J. Zhang, L. Li, D. G. Dorrell,Y. Guo, "Direct torque control with a modified switching table for a direct matrix converter based AC motor drive system," [40] I. Takahashi,Noguchi, T., "A new quick-response and high-efficiency control strategy of an induction motor," [41] D. Casadei, G. Serra,A. Tani,"The use of matrix converters in direct torque control of induction machines," [42] S. Sebtahmadi, H. Pirasteh, S. H. Kaboli, A. Radan,S. Mekhilef,"A 12-sector space vector switching scheme for performance improvement of matrix-converter-based DTC of IM drive," [43] H. Abu-Rub, A. Iqbal,J. Guzinski, [44] S. Kouro, P. Cortés, R. Vargas, U. Ammann,J. Rodríguez, "Model predictive control—a simple and powerful method to control power converters," [45] P. Correa, J. Rodríguez, M. Rivera, J. R. Espinoza,J. W. Kolar, "Predictive control of an indirect matrix converter," [46] M. Rivera, C. Rojas, J. Rodriguez, P. Wheeler, B. Wu,J. Espinoza, “Predictive current control with input filter resonance mitigation for a direct matrix converter,” [47] L. Wang, H. Dan, Y. Zhao, Q. Zhu, T. Peng, Y. Sun,P. Wheeler, "A finite control set model predictive control method for matrix converter with zero common-mode voltage," [48] J. Zhang, L. Li, Z. Malekjamshidi,D. G. Dorrell, "Predictive voltage control of direct matrix converter with reduced number of sensors for the renewable energy and microgrid applications," [49] J. Zhang, L. Li, D. G. Dorrell, J. Rodriguez,M. Norambuena,"Sequential model predictive control of direct matrix converter without weighting factors," [50] M. Norambuena, J. Rodriguez, Z. Zhang, F. Wang, C. Garcia,R. Kennel, "A very simple strategy for high quality performance of AC machines using model predictive control," [51] S. F. Pinto,J. Fernando Silva, "Robust sliding mode control of matrix converters with unity power factor," [52] P. Mattavelli, L. Rossetto, G. Spiazzi,P. Tenti, "Generalpurpose sliding-mode controller for DC/DC converter applications," [53] S. C. Tan, Y. M. Lai,C. K. Tse, "General design issues of sliding-mode controllers in DC-DC converters," [54] P. Wheeler, J. Clare,L. Empringham, "Enhancement of matrix converter output waveform quality using minimized commutation times," [55] J. Kolar, T. Friedli, J. Rodriguez,P. Wheeler, "Review of three-phase PWM AC-AC converter topologies," [56] M. Jussila,H. Tuusa, "Comparison of direct and indirect matrix converters in induction motor drive," [57] M. Melaku, [58] M. Imayavaramban,A. V.Krishna Chaithanya, and B. G. Fernandes, "Analysis and mathematical modelling of matrix converter for adjustable speed AC drives," [59] R. Strzelecki, A. Noculak, H. Tunia, K. Sozanski,Z. Fedyczak, "UPFC with matrix converter," [60] B. T. Ooi,M. Kazerani, "Unified power flow controller based on matrix converter," [61] J. Monteiro, J. Fernando Silva, S. F. Pinto,J. Palma, "Matrix converter-based unified power-flow controllers: advanced direct power control method," [62] J. Monteiro, J. Fernando Silva, J. Palma,S. Pinto, "Unified power flow controllers without energy storage: designing power controllers for the matrix converter solution," [63] P. Wheeler, P. Zanchetta, J. C. Clare, L. Empringham, M. Bland,D. Katsis, "A utility power supply based on a four-output leg matrix converter," [64] P. Zanchetta, P. W. Wheeler, J. C. Clare, M. Bland, L. Empringham,D. Katsis, "Control design of a three-phase matrix-converterbased AC-AC mobile utility power supply," [65] S. Arevalo, P. Zanchetta, P. W. Wheeler, A. Trentin,L. Empringham, "Control and implementation of a matrix-converterbased AC ground power-supply unit for aircraft servicing," [66] H. Hojabri, H. Mokhtari,L. Chang, "Reactive power control of permanent-magnet synchronous wind generator with matrix converter," [67] A. Garcés,M. Molinas, "A study of efficiency in a reduced matrix converter for offshore wind farms," [68] S. M. Barakati, M. Kazerani,J. D. Aplevich, "Maximum power tracking control for a wind turbine system including a matrix converter," [69] R. Cárdenas, R. Peña, G. Tobar, J. Clare, P. Wheeler,G. Asher, "Stability analysis of a wind energy conversion system based on a [70] J. Zhang, L. Li, D. G. Dorrell, J. Rodriguez,M. Norambuena,"Investigation of grid-connected and islanded direct matrix converter for the renewable microgrid applications with model predictive control," [71] J. Zhang, D. G. Dorrell, L. Li, Y. Guo, "Decoupling controller design and controllable regions analysis for the space vector modulated matrix converter-unified power flow controller in transmission systems," [72] J. Zhang, L. Li, T. He, M. M. Aghdam,D. G. Dorrell, "Investigation of direct matrix converter working as a versatile converter (AC/AC, AC/DC, DC/AC, DC/DC conversion) with predictive control," |
No related articles found! |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||