[1] J. Mahseredjian, V. Dinavahi,J. A. Martinez, “Simulation tools for electromagnetic transients in power systems: overview and challenges,” IEEE Trans. Power Del., vol. 24, no. 3, pp. 1657-1669, Jul. 2009. [2] R. Kuffel, J. Giesbrecht, T. Maguire, R. P. Wierckx,P. G.McLaren, “RTDS - a fully digital power system simulator operating in real-time,” In Proc. International Conference on Energy Management and Power Delivery (EMPD), vol. 2, pp. 498-503, 1995. [3] S. Abourida, C. Dufour, J. Belanger, G. Murere, N. Lechevin,B. Yu, “Real-time PC-based simulator of electric systems and drives,” In Proc. IEEE APEC, Mar. 2002, pp. 433-438. [4] E. Adzic, S. Grabic, M. Vekic, V. Porobic,N. F. Celanovic, “Hardware-in-the-loop optimization of the 3-phase grid connected converter controller,” InProc. IEEE IECON, pp. 5392-5397, Nov. 2013. [5] I. A.Hiskens and J. Alseddiqui, “Sensitivity, approximation, and uncertainty in power system dynamic simulation,” IEEE Trans. Power Sys., vol. 21, no. 4, pp.1808-1820, 2006. [6] X. Wu, S. Lentijo, A. Deshmuk, A. Monti,F. Ponci, “Design and implementation of a power-hardware-in-the-loop interface: A nonlinear load case study,” In ProcIEEE APEC, pp. 1332-1338, 2005. [7] O. R. Schurig, “A miniature AC transmission system: for the practical solution of network and transmission-system problems,” Journal of the American Institute of Electrical Engineers, vol.42, no.10, pp.1033-104, 2013. [8] H. L. Hazen, O. R. Schurg,M. F. Gardner, “The M. I. T. network analyzer: design and application to power system problems,” American Institute of Electrical Engineers, vol.49, no.3, pp. 1102-1113, Jul. 1930. [9] B. Kroposki, D. Mooney, T. Markel,B. Lundstrom, “Energy systems integration facility at the National Renewable Energy Laboratory,” InProc. IEEE Energytech, pp. 4, May 2012. [10] R. H. Lasseter, J. H. Eto,B. Schenkman, “CERTS microgrid laboratory test bed,” IEEE Trans. Power Del., vol. 26, no. 1, pp. 325-332, 2011. [11] J. C. H.Bone, “Influence of rotor diameter and length on the rating of induction motors,” IEE Journal on Electric Power Applications, vol. 1, no. 1, pp. 2-6, Feb. 1978. [12] L. A. C.Lopes, J. Lhuilier, A. Mukherjee, M. F. Khokar, “A wind turbine emulator that represents the dynamics of the wind turbine rotor and drive train,” InProc. IEEE Conference on Power Electronics Specialists, pp. 2092-2097, 2005. [13] H. Slater, D. Atkinson,A. Jack, “Real-time emulation for power equipment development. Part II: the virtual machine,” in Proc. Inst. Elect. Eng., vol. 145, no. 3, pp. 153-158, May 1998. [14] W. A. Peterson, “Methods and apparatus for motor emulation,” U.S. Patent US8587322 B2, Nov 19, 2013. [15] AVTestSystems|AV-900/900CE [Online] Available:http://www. avtest-systems.com/av-900. [16] The SPS E-Motor Emulator (EME) [Online] Available:http://www.set-powersys.de/en/eme/. [17] L. Yang, Y. Ma, J. Wang, J. Wang, X. Zhang, L. M. Tolbert, F. Wang,K. Tomsovic, “Development of converter based reconfigurable power grid emulator,” InProc. IEEE -ECCE, pp. 3990-3997, 2014. [18] L. Yang, X. Zhang, Y. Ma, J. Wang, L. Hang, K. Lin, L. M. Tolbert, F. Wang,K. Tomsovic, “Hardware implementation and control design of generator emulator in multi-converter system,” InProc. IEEE -APEC, pp. 2316-2323, 2013. [19] L. Yang, Y. Ma, J. Wang, J. Wang, X. Zhang, L. M. Tolbert, F. Wang,K. Tomsovic, “Three-phase power converter based real-time synchronous generator emulation,” IEEE Trans. Power Electron., vol. 32, no. 2, pp.1651-1665, 2017. [20] J. Wang, L. Yang, Y. Ma, X. Shi, X. Zhang, L. Hang, K. Lin, L. M. Tolbert, F. Wang,K. Tomsovic, “Regenerative power converters representation of grid control and actuation emulator,” InProc. IEEE -ECCE, pp. 2460-2465, Sep. 2012. [21] J. Wang, Y. Ma, L. Yang, L. M. Tolbert,F. Wang, “Power converter based three-phase induction motor load emulator,” InProc. IEEE -APEC, pp. 3270-3274, 2013. [22] J. Wang, L. Yang, Y. Ma, J. Wang, L. M. Tolbert, F. Wang,K. Tomsovic, “Static and dynamic power system load emulation in converter-based reconfigurable power grid emulator,” IEEE Trans. Power Electron., vol. 31, no. 4, pp. 3239-3251, 2016. [23] Y. Ma, L. Yang, J. Wang, F. Wang,L. Tolbert, “Emulating full-converter wind turbine by a single converter in a multiple converter based emulation system,” InProc. IEEE -APEC, pp. 3042-3047, 2014. [24] W. Cao, Y. Ma, J. Wang, L. Yang, J. Wang, F. Wang,L. M. Tolbert, “Two-stage PV inverter system emulator in converter based power grid emulation system,” InProc. IEEE -ECCE, pp. 4518-4525, Sep. 2013. [25] J. Wang, L. Yang, C. Blalock, L. M. Tolbert, “Flywheel energy storage emulation using reconfigurable hardware test-bed of power converters,”Elect. Energy Storage Applicat. and Technologies, 2013. [26] J. D. Boles, Y. Ma, W. Cao, L. M. Tolbert,F. Wang, “Battery energy storage emulation in a converter-based power system emulator,” InProc. IEEE-APEC, pp. 2355-2362, 2017. [27] Y. Ma, L. Yang, F. Wang,L. M. Tolbert, “Short circuit fault emulation by shunt connected voltage source converter,” InProc. IEEE -ECCE, pp. 2622-2628, 2015. [28] B. Liu, S. Zhang, S. Zheng, Y. Ma, F. Wang,L. M. Tolbert, “Design consideration of converter based transmission line emulation,” InProc. IEEE -APEC, pp. 966-973, 2016. [29] B. Liu, S. Zheng, Y. Ma, F. Wang,L. M. Tolbert, “Control and implementation of converter based AC transmission line emulation,”InProc. IEEE -APEC, pp. 1807-1814, 2015. [30] S. Zhang, B. Liu, S. Zheng, Y. Ma, F. Wang and L. M. Tolbert, “Three-phase short-circuit fault implementation in converter based transmission line emulator,” inProc. IEEE-ECCE, 2017. [31] Y. Li, X. Shi, B. Liu, W. Lei, F. Wang,L. M. Tolbert, “Development, demonstration, and control of a testbed for multiterminal HVDC system,” IEEE Trans. Power Electron., vol. 32, no. 8, pp. 6069-6078, 2017. [32] Y. Ma, L. Yang, J. Wang, X. Shi, F. Wang,L. Tolbert, “Circulating current control and reduction in a paralleled converter test-bed system,” InProc. IEEE -ECCE, pp. 5426-5432, 2013. [33] P. Kundur, Power System Stability and Control. New York: McGraw-Hill, 1994. [34] L. Zhu, H. Liu, Y. Ma, Y. Liu, E. Farantatos, M. Patel,S. McGuinness, “Adaptive and coordinated oscillation damping control using measurement-driven approach,” InProc. IEEE-PSCC, 2016. [35] F. Bai, L. Zhu, Y. Liu, X. Wang, K. Sun, Y. Ma, M. Patel, E. Farantatos,N. Bhatt, “Design and implementation of a measurement-based adaptive wide-area damping controller considering time delays,” Electric Power Systems Research, vol. 130, pp. 1-9, 2016. [36] Y. Ma, L. Yang, F. Wang,L. Tolbert, “Virtual synchronous generator control of full converter wind turbines with short term energy storage,” IEEE Trans. Ind. Electron. vol. 64, no. 11, pp, 8821-8831, Nov. 2017. [37] F. Hu, L. Yang, J. Wang, Y. Ma, K. Sun, L. M. Tolbert,F. Wang, “Measurement-based voltage stability assessment and control on CURENT hardware test bed system,” InProc. IEEEPESGM, pp.1-5, 2016. [38] W. Cao, Y. Ma, X. Zhang,F. Wang, “Sequence impedance measurement of three-phase inverters using a parallel structure,” InProc. IEEE-APEC, pp. 3031-3038, 2015. [39] W. Cao, Y. Ma,F. Wang, “Harmonic stability analysis and controller parameter design of three-phase inverter-based multi-bus ac systems based on sequence impedances,” InProc. IEEE-ECCE, pp.1-8, 2016. [40] W. Cao, Y. Ma,F. Wang, “Sequence impedance based harmonic stability analysis and controller parameter design of three-phase inverter-based multi-bus ac power systems,” IEEE Trans. Power Electron., vol. 32, no. 10, pp.7674-7693, 2017. [41] S. Zhang, Y. Ma, L. Yang, F. Wang,L. M. Tolbert.“Development of a hybrid emulation platform based on RTDS and reconfigurable power converter-based testbed,” InProc. IEEE -APEC, pp.3121-3127, 2016. |